Crown XLi800 Manual

Crown Modtager XLi800

Læs gratis den danske manual til Crown XLi800 (12 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Crown XLi800, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
Obtaining Other Language Versions: To obtain information in another language about the use
of this product, please contact your local Crown Distributor. If you need assistance locating your
local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment.
Nor does it cover every possible situation which may arise during installation, operation or
maintenance.
The information provided in this manual was deemed accurate as of the publication date. However,
updates to this information may have occurred. To obtain the latest version of this manual, please
visit the Crown website at www.crownaudio.com.
Later versions of this manual and additional information about this product may be available at the
Crown website at www.crownaudio.com.
Trademark Notice: Crown and Crown Audio are registered trademarks of Crown International.
Other trademarks are the property of their respective owners.
©2012 by Harman International. 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A.
Telephone: 574-294-8000
Models: XLi 800, XLi 1500, XLi 2500, XLi 3500
XLi Series Operation Manual
5024247 - 07/12
XLi Series Power Amplifiers
page 2 Operation Manual
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manu-
facturer.
12. Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15. Use the mains plug to disconnect the apparatus from the
mains.
16. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
17. WARNING: THIS APPLIANCE SHALL BE CONNECTED TO A
MAINS SOCKET OUTLET WITH A PROTECTIVE EARTHING
CONNECTION.
18. DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING
OR SPLASHING AND ENSURE THAT NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, ARE PLACED
ON THE EQUIPMENT.
19. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL
REMAIN READILY OPERABLE.
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP
OR BOTTOM COVERS. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
TO COMPLETELY DISCONNECT THIS EQUIPMENT
FROM THE AC MAINS, DISCONNECT THE POWER
SUPPLY CORD PLUG FROM THE AC RECEPTACLE. THE
MAINS PLUG OF THE POWER SUPPLY CORD SHALL
REMAIN READILY OPERABLE.
WARNING: PAY ATTENTION TO A PROCEDURE, PRACTICE, CONDI-
TION OR THE LIKE, IF NOT CORRECTLY PERFORMED OR ADHERED
TO, COULD RESULT IN PERSONAL INJURY OR DEATH.
CAUTION: PAY ATTENTION TO PROCEDURE, PRACTICE,
CONDITION OR THE LIKE, IF NOT CORRECTLY PERFORMED OR
ADHERED TO, COULD RESULT IN DAMAGE OR DESTRUCTION TO
PART OR ALL OF THE COMPONENT.
WATCH FOR THESE SYMBOLS:
The lightning bolt triangle is used to alert the user to
the risk of electric shock.
The exclamation point triangle is used to alert the user
to important operating or maintenance instructions.
IMPORTANT
XLi Series amplifiers require Class 2 output wiring.
MAGNETIC FIELD
CAUTION! Do not locate sensitive high-gain equipment such as
preamplifiers or tape decks directly above or below the unit. Be-
cause this amplifier has a high power density, it has a strong mag-
netic field which can induce hum into unshielded devices that are
located nearby. The field is strongest just above and below the unit.
If an equipment rack is used, we recommend locating the
amplifier(s) in the bottom of the rack and the preamplifier or
other sensitive equipment at the top.
FCC COMPLIANCE NOTICE
This device complies with part 15 of the FCC rules. Operation is sub-
ject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to ra-
dio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Important Safety Instructions

Produkt Specifikationer

Mærke: Crown
Kategori: Modtager
Model: XLi800

Har du brug for hjælp?

Hvis du har brug for hjælp til Crown XLi800 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Crown Manualer

Crown

Crown CDi DriveCore 4|1200BL Manual

17 Juli 2025
Crown

Crown CDi DriveCore 2|300BL Manual

11 Januar 2025
Crown

Crown I-Tech 4x3500HD Manual

29 December 2024
Crown

Crown DCi 8|600 Manual

5 September 2024
Crown

Crown VRack 12000HD Manual

5 September 2024
Crown

Crown VRack 4x3500HD Manual

5 September 2024
Crown

Crown CT 4150 Manual

27 August 2024
Crown

Crown CTs 600 Manual

27 August 2024
Crown

Crown CT 8150 Manual

27 August 2024
Crown

Crown CTs 8200 Manual

27 August 2024

Modtager Manualer

Nyeste Modtager Manualer

CYP

CYP AU-A220 Manual

30 Juli 2025
Sirus

Sirus I-Amp 8.150T Manual

30 Juli 2025
AER

AER Colourizer 2 Manual

30 Juli 2025
Sirus

Sirus I-Amp 1.300T Manual

30 Juli 2025
PAC

PAC AP4-FD32 Manual

30 Juli 2025
CYP

CYP PUV-1540S-RX Manual

30 Juli 2025
ART

ART USB Dual Pre Manual

29 Juli 2025
SSL

SSL Pure Drive Quad Manual

29 Juli 2025
SSL

SSL Pure Drive Octo Manual

29 Juli 2025
CYP

CYP PUV-1550SRX Manual

29 Juli 2025