CRUX AUX-BM4 Manual


Læs gratis den danske manual til CRUX AUX-BM4 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11 anmeldelser. Har du et spørgsmål om CRUX AUX-BM4, eller vil du spørge andre brugere om produktet?

Side 1/2
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.080719
1 of 2
R
INTERFACING SOLUTIONS
- The AUX-BM4 will enable the Auxiliary Audio Input on the OEM navigation radio menu.
PRODUCT FEATURES:
PARTS INCLUDED:
AUX-BM4 OBD Coder Audio Input Cable
AUX-BM4
Auxiliary Input Interface and OBD Coder for Select
BMW Vehicles with Business or Professional Navigation System
1. Locate OBD-port and remove cover (commonly located under the dashboard on the driver side).
2. Turn ignion switch to ACC.
3. Wait unl the navigaon has booted.
4. Plug coder into OBD-port.
5. The navigaon will re-boot.
6. When the navigaon startup-screen shows, remove coder from OBD-port.
7. Your radio’s Auxiliary Audio input feature is now enabled.
To remove the Auxiliary Audio feature from the navigaon’s menu repeat steps 1-6. Aer the rst use on a
vehicle, the coder AUX-BM4 is personalized to this vehicle. On this vehicle the enabling and removing the
Audio-AUX feature can be repeated without limit.
The AUX-cable must be connected into the female Quadlock connector of the vehicle harness on the
back of the radio (receiver under the AC vents).
Quadlock connector, chamber B
Pin 2 ● Audio (+) le (white)
Pin 7 ● Audio (+) right (red)
Pin 8 ● Audio (-) ground (black)


Produkt Specifikationer

Mærke: CRUX
Kategori: Ikke kategoriseret
Model: AUX-BM4

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX AUX-BM4 stil et spørgsmål nedenfor, og andre brugere vil svare dig