CRUX AUX-MB1 Manual

CRUX Ikke kategoriseret AUX-MB1

Læs gratis den danske manual til CRUX AUX-MB1 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10 anmeldelser. Har du et spørgsmål om CRUX AUX-MB1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Mercedes Benz

2012-2014

C- Class

2013-2014

GLK

2013-2014

CLS

2012-2015

E- Class

2012-2015

G- Class

2012-2015

SLK

2013-2015

2011-2013

SLS

2015-2015

GLA

1. The AUX-MB1 will enable the Auxiliary Audio Input on the navigation . radio menu

AUX- MB1

Coder dongle

Audio Input

Cable

r ev.062915

continued

1. Locate OBD-port and remove cover (commonly located under the dashboard on the

driver side).

2. Turn ignition switch to ACC.

3. Wait until the navigation has booted.

4. Plug coder into OBD- . port

5. The navigation will re-boot.

6. When the navigation startup-screen shows, remove coder from OBD- . port

7. Your radio’s Auxiliary Audio input feature is now enabled.

To remove the Auxiliary Audio feature from the navigation’s menu repeat steps 1- 6. After the

first use on a vehicle, the coder personalized to this vehicle. AUX- MB1 is On this vehicle the

enabling and removing the audio- AUX feature can be repeated without limit.

The AUX-cable must be connected into the female Quadlock connector of the vehicle harness

on the of the back radio (receiver under the AC vents).

Quadlock connector, chamber A (White connector)

Pin 6 ●Audio (+) left (Yellow Wire)

Pin 12 (+) ● Audio right (Red Wire)

Pin 11 ● Audio (-) ground (Black)

If Pins 6 and 12 are occupied, use the following pins:

Pin 4 ● (+) Audio left (Yellow Wire)

Pin 10 ● Audio right (+) (Red Wire)

Pin 11 ● Audio (-) ground (Black)

1. Activating the Auxiliary Audio Input feature on the radio will create an AUX tab on the source

drop down menu.

2. Plug in your external audio source, ie. iPod, MP3 player, DVD player to the Aux input cable.

3. Using the Comand controller on the center console, go to the source menu and click on the

AUX tab.

4. Audio should be heard on the factory sound system.

Legal disclaimer: C ompany names and trademarks, as well as product names/codes are registered trademarks ®

of their legal owners.

2 / 2

r ev.062915

Produkt Specifikationer

Mærke:	CRUX
Kategori:	Ikke kategoriseret
Model:	AUX-MB1

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX AUX-MB1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CRUX Manualer

CRUX DKGM-51 Manual

23 August 2025

CRUX RVCFD-79F Manual

23 August 2025

CRUX ACP-TSL Manual

23 August 2025

CRUX RVCCH-75WT Manual

22 August 2025

CRUX VIMMB-85N Manual

10 Juli 2025

CRUX VIMPR-90P Manual

10 Juli 2025

CRUX VIMCF-93C Manual

10 Marts 2025

CRUX VIMFD-95F Manual

10 Marts 2025

CRUX VIMCF-93 Manual

10 Marts 2025

CRUX VIMAD-84 Manual

10 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kimo LR 110 Manual

2 September 2025

HMS Premium LPD02 Manual

2 September 2025

AVer E1008 Manual

2 September 2025

Biltema 17-547 Manual

2 September 2025

Groen AH/1E Manual

2 September 2025

ACOPower HY-P30 Manual

2 September 2025

Yamaha True X Speaker 3A WS-X3A Manual

2 September 2025

Globe RG30 Manual

2 September 2025

Deye SUN-6K-SG05LP1-EU-AM2-P Manual

2 September 2025

Neutrik NLT4FXX Manual

2 September 2025