CRUX DKGM-C2D Manual

CRUX Ikke kategoriseret DKGM-C2D

Læs gratis den danske manual til CRUX DKGM-C2D (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om CRUX DKGM-C2D, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.092921

DKGM-C2D

Radio Replacement with Double DIN Dash Kit for

GM Class II Vehicles 2002 - 2013

1 of 4

- Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio.

- Supports Bose, Y-91 and non-amplied audio systems.

- Retains chime functions such as: seat belt, check engine, key in ignition, low fuel, low oil and lights on.

- Retains RAP (Retained Accessory Power).

- Double DIN Dash Kit included.

- EIA color coded wiring for easy installation.

RADIO REPLACEMENT

INTERFACING SOLUTIONS

DKGM-C2D MODULE DKGM-C2D HARNESS DOUBLE DIN DASH KIT

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

DKGM-C2D

Radio Replacement with Double DIN Dash Kit for

GM Class II Vehicles 2002 - 2013

2 of 4

RADIO REPLACEMENT

INTERFACING SOLUTIONS

SELECTING THE AUDIO SYSTEM:

If the vehicle is equipped with an amplied audio system, the DKGM-C2D has a built-in audio level

adaptor that outputs the proper audio level from the aftermarket radio to the factory amplier. To use this

feature, plug in the male 8-pin connector on the DKGM-C2D harness to the GRAY female 8-pin connector

on the DKGM-C2D module. The module is also labeled “Bose” and “Non Bose” to avoid confusion. (see

picture below)

If the vehicle is NOT equipped with a factory amplied system, plug in the male 8-pin connector to the

BLACK female 8-pin on the DKGM-C2D module.

Non-BOSE

(Non-Amplied)

Connecon

BOSE

(Amplied)

Connecon

CHIME VOLUME ADJUSTMENT:

The DKGM-C2D has a potentiometer to adjust the chime volume. It is set at half way by default. To

adjust the volume, simply use a suitable screw driver and turn the potentiometer clockwise to increase

the volume and counter-clockwise to decrease the volume.

Chime

Volume

Adjustment

rev.092921

Produkt Specifikationer

Mærke:	CRUX
Kategori:	Ikke kategoriseret
Model:	DKGM-C2D

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX DKGM-C2D stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CRUX Manualer

CRUX DKGM-51 Manual

23 August 2025

CRUX RVCFD-79F Manual

23 August 2025

CRUX ACP-TSL Manual

23 August 2025

CRUX RVCCH-75WT Manual

22 August 2025

CRUX VIMMB-85N Manual

10 Juli 2025

CRUX VIMPR-90P Manual

10 Juli 2025

CRUX VIMCF-93C Manual

10 Marts 2025

CRUX VIMFD-95F Manual

10 Marts 2025

CRUX VIMCF-93 Manual

10 Marts 2025

CRUX VIMAD-84 Manual

10 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kimo LR 110 Manual

2 September 2025

HMS Premium LPD02 Manual

2 September 2025

AVer E1008 Manual

2 September 2025

Biltema 17-547 Manual

2 September 2025

Groen AH/1E Manual

2 September 2025

ACOPower HY-P30 Manual

2 September 2025

Yamaha True X Speaker 3A WS-X3A Manual

2 September 2025

Globe RG30 Manual

2 September 2025

Deye SUN-6K-SG05LP1-EU-AM2-P Manual

2 September 2025

Neutrik NLT4FXX Manual

2 September 2025