CRUX DKGM-C2S Manual

CRUX Ikke kategoriseret DKGM-C2S

Læs gratis den danske manual til CRUX DKGM-C2S (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om CRUX DKGM-C2S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.092921

DKGM-C2S

Radio Replacement with Single DIN Dash Kit for

GM Class II Vehicles 2002 - 2013

1 of 8

- Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio.

- Supports Bose, Y-91 and non-amplied audio systems.

- Retains chime functions such as: seat belt, check engine, key in ignition, low fuel, low oil and lights on.

- Retains RAP (Retained Accessory Power).

- Single DIN Dash Kit included.

- EIA color coded wiring for easy installation.

DKGM-C2S MODULE DKGM-C2S HARNESS SINGLE DIN DASH KIT

RADIO REPLACEMENT

INTERFACING SOLUTIONS

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

2 of 8

DKGM-C2S

Radio Replacement with Single DIN Dash Kit for

GM Class II Vehicles 2002 - 2013

RADIO REPLACEMENT

INTERFACING SOLUTIONS

SELECTING THE AUDIO SYSTEM:

If the vehicle is equipped with an amplied audio system, the DKGM-C2S has a built-in audio level

adaptor that outputs the proper audio level from the aftermarket radio to the factory amplier. To use this

feature, plug in the male 8-pin connector on the DKGM-C2S harness to the GRAY female 8-pin connector

on the DKGM-C2S module. The module is also labeled “Bose” and “Non Bose” to avoid confusion. (see

picture below)

If the vehicle is NOT equipped with a factory amplied system, plug in the male 8-pin connector to the

BLACK female 8-pin on the DKGM-C2S module.

Non-BOSE

(Non-Amplied)

Connecon

BOSE

(Amplied)

Connecon

CHIME VOLUME ADJUSTMENT:

The DKGM-C2S has a potentiometer to adjust the chime volume. It is set at half way by default. To

adjust the volume, simply use a suitable screw driver and turn the potentiometer clockwise to increase

the volume and counter-clockwise to decrease the volume.

Chime

Volume

Adjustment

rev.092921

Produkt Specifikationer

Mærke:	CRUX
Kategori:	Ikke kategoriseret
Model:	DKGM-C2S

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX DKGM-C2S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CRUX Manualer

CRUX DKGM-51 Manual

23 August 2025

CRUX RVCFD-79F Manual

23 August 2025

CRUX ACP-TSL Manual

23 August 2025

CRUX RVCCH-75WT Manual

22 August 2025

CRUX VIMMB-85N Manual

10 Juli 2025

CRUX VIMPR-90P Manual

10 Juli 2025

CRUX VIMCF-93C Manual

10 Marts 2025

CRUX VIMFD-95F Manual

10 Marts 2025

CRUX VIMCF-93 Manual

10 Marts 2025

CRUX VIMAD-84 Manual

10 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kimo LR 110 Manual

2 September 2025

HMS Premium LPD02 Manual

2 September 2025

AVer E1008 Manual

2 September 2025

Biltema 17-547 Manual

2 September 2025

Groen AH/1E Manual

2 September 2025

ACOPower HY-P30 Manual

2 September 2025

Yamaha True X Speaker 3A WS-X3A Manual

2 September 2025

Globe RG30 Manual

2 September 2025

Deye SUN-6K-SG05LP1-EU-AM2-P Manual

2 September 2025

Neutrik NLT4FXX Manual

2 September 2025