CRUX RVCMB-78M Manual

CRUX Ikke kategoriseret RVCMB-78M

Læs gratis den danske manual til CRUX RVCMB-78M (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 11 anmeldelser. Har du et spørgsmål om CRUX RVCMB-78M, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

- No Dealer programming required.

- Activates the Rear-View Camera function of the Mercedes Benz Audio 15 radio.

- Includes lip mount camera.

- Compatible with NTSC cameras only.

RVCMB-78M Module

RVCMB-78M Harness

FAKRA to RCA Adaptor

Lip Mount Camera

Pin assignment of factory Quadlock connector:

Please note that the given information must be verified by the

installer. Crux Interfacing assumes no liability for changes in

wire color or pin assignments made by the vehicle manufacturer.

Pin assignment of RVCMB-78M 8-Pin Molex connector:

Cable color

Pin- No.

Assignment

● Yellow

Pin 4

CAN-HIGH connection to the head-unit–

● Blue

Pin 3

CAN-LOW connection to the head-unit –

●● Yellow/Black

Pin 8

CAN-HIGH connection to the vehicle –

●● Blue/Black

Pin 7

CAN-LOW connection to the vehicle –

● Red

Pin 1

+12V Constant

● Black

Pin 5

Ground

● White

Pin 2

+12V rear view camera power (max. 400mA)

Assignment

Pin No.

+12V battery

Pin 15

Ground

Pin 12

CAN-low

Pin 9

CAN-high

Pin 11

rev.030220

1/3

1. Connect female 8-pin Molex connector of the RVCMB-78M T-harness to male 8-pin Molex

connector on the RVCMB-78M module.

2. Unplug the female Quadlock connector of the vehicle harness from the rear of the head unit and

connect it to the male Quadlock connector of RVCMB-78M T-harness.

3. Remove the two 12-pin Quadlock plug inserts from the female Quadlock connector of the vehicle

harness and insert them into the same position on the female Quadlock connector of the

RVCMB-78M T-harness.

4. Plug female Quadlock connector of the RVCMB-78M T-harness to the male Quadlock connector

of the head unit.

5. Plug the FAKRA to RCA adaptor cable to the GREEN FAKRA connector on the radio.

6. Plug the camera’s extension cable to the FAKRA to RCA adapter and run the cable to the back of

the vehicle. Use the WHITE wire to power the camera (see diagram above).

7. Install the lip mount camera at the back of the vehicle next to the license plate light.

rev.030220

2/3

*Camera Loop Wires:

White wire: Cut to remove Parking lines

Blue wire: Cut for top mount

*Camera Loop

wires

Produkt Specifikationer

Mærke:	CRUX
Kategori:	Ikke kategoriseret
Model:	RVCMB-78M

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX RVCMB-78M stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CRUX Manualer

CRUX DKGM-16B Manual

3 Januar 2025

CRUX ACPBM-77Y Manual

1 Januar 2025

CRUX ACPMB-45W Manual

1 Januar 2025

CRUX ACPLX-12XW Manual

1 Januar 2025

CRUX ACPBM-77X Manual

1 Januar 2025

CRUX ACPAD-01 Manual

1 Januar 2025

CRUX ACPAD-81Y Manual

1 Januar 2025

CRUX ACPBM-77Z Manual

1 Januar 2025

CRUX ACPMB-50W Manual

1 Januar 2025

CRUX ACPLR-01 Manual

1 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo DFM-32-20-B-PPV-A-KF Manual

17 Juni 2025

Festo DGST-25-80-E1A Manual

17 Juni 2025

OmniMount OBLED80FM Manual

17 Juni 2025

OmniMount FPK200FT Manual

17 Juni 2025

Festo ESNU-40-25-P-A Manual

17 Juni 2025

Festo DFM-25-125-B-PPV-A-GF Manual

17 Juni 2025

Playtive IAN 306800 Manual

17 Juni 2025

Playtive IAN 313534 Manual

17 Juni 2025

Microchip MPFS095TS Manual

17 Juni 2025

Festo DFM-40-50-B-PPV-A-GF Manual

17 Juni 2025