CRUX RVCMB-78O Manual

CRUX Ikke kategoriseret RVCMB-78O

Læs gratis den danske manual til CRUX RVCMB-78O (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 7 anmeldelser. Har du et spørgsmål om CRUX RVCMB-78O, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

- No Dealer programming required.

- Activates the Rear-View Camera function of the Comand NTG4, NTG4-212 or NTG4.5 radios.

- Compatible with Mercedes Benz Comand NTG4, NTG4- and NTG4.5 systems. 212

- Not compatible with Audio 20 systems (single CD radio).

- Compatible with NTSC cameras only.

In the event this unit is to be returned for any reason, the customer must the “decode”

radio before doing so to receive a replacement or refund. See instructions on page 2 on

how to decode the radio.

RVCMB-78O Kit

For Comand NTG4 Installation

Connect the video RCA of the after-market rear-view camera to the female RCA

connector of the RVCMB-78O video cable.

Connect the Fakra plug of the RVCMB-78O video cable on the green Fakra socket of the

COMAND NTG4 unit.

1 /3

rev.121819

For Comand NTG4-212 and NTG4.5 Installation

Connect the video RCA of the after-market rear-view camera to the female RCA connector

of the RVCMB-78O video cable.

Connect the Fakra plug of the RVCMB-78O video cable on the right green Fakra socket of

the COMAND NTG4.5 unit.

Coding the OBD II

1. Locate OBD-port and remove cover.

2. Turn on ignition ACC. to

3. Wait until the headunit has completely booted.

4. Plug the RVCMB-78O into OBD port.

5. Leave the RVCMB-78O for about 30 seconds or until you see a solid Green LED.

6. Remove the RVCMB-78O from the OBD port.

To decode the radio, repeat steps 1-6.

Note: After the first use on a vehicle, the RVCMB-78O is personalized to this vehicle (head-unit)

and can be used unlimited times to code or reverse coding ONLY on this vehicle.

LED Information:

LED

Status

Description

Green

Solid

Coding procedure successfully completed

Flashing

Coding process in progress

Red

Solid

Remove coding procedure successfully completed

Flashing

Coding process failed / license violation

Green + Red

Solid

CAN Communication Error! - Abort coding session

2 / 3

rev.121819

Produkt Specifikationer

Mærke:	CRUX
Kategori:	Ikke kategoriseret
Model:	RVCMB-78O

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX RVCMB-78O stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CRUX Manualer

CRUX DKGM-51 Manual

23 August 2025

CRUX RVCFD-79F Manual

23 August 2025

CRUX ACP-TSL Manual

23 August 2025

CRUX RVCCH-75WT Manual

22 August 2025

CRUX VIMMB-85N Manual

10 Juli 2025

CRUX VIMPR-90P Manual

10 Juli 2025

CRUX VIMCF-93C Manual

10 Marts 2025

CRUX VIMFD-95F Manual

10 Marts 2025

CRUX VIMCF-93 Manual

10 Marts 2025

CRUX VIMAD-84 Manual

10 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Turbo Air TBC-65SB-N6 Manual

2 September 2025

Speco Technologies N4WNRMM Manual

2 September 2025

Fromm & Starck STAR_FR_04 Manual

2 September 2025

XPower BR-282A Manual

2 September 2025

Grunkel SAN-GRILLNG Manual

2 September 2025

Phoenix Contact BL2 PPC AIO65 7000 Manual

2 September 2025

AVer DL10 Manual

2 September 2025

Panduit C2CAC06ABWPAB1 Manual

2 September 2025

Rigol HDO1204 Manual

2 September 2025

XPower A-2B Manual

2 September 2025