CRUX SOCGM-17C Manual


Læs gratis den danske manual til CRUX SOCGM-17C (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 31 anmeldelser. Har du et spørgsmål om CRUX SOCGM-17C, eller vil du spørge andre brugere om produktet?

Side 1/5
- Retains factory features in select GM Class II Data Bus vehicles while functioning with an
aftermarket radio.
- Supports Bose, Monsoon, Y-91 audio and non-amplified audio systems.
- Retains chime functions.
- Built-in chime volume adjustment.
- EIA color coded wiring for easy installation.
1. The Front and Rear fading are not retained on Y-91 Bose System.
2. Chime includes: seat belt, check engine, key in ignition, low fuel, low oil and lights on.
SOCGM-17C Module
SOCGM-17C Harness (GM-C2)
rev.092017
1 / 3
If the vehicle is equipped with an amplified audio system, the SOCGM-17C has a built-in audio
level adaptor that outputs the proper audio level from the aftermarket radio to the factory
amplifier. To use this feature, plug in the male 8-pin connector on the GM-17C harness to the
GRAY female 8-pin connector on the GM-17C module. The module is also labeled “Bose” and
“Non Bose” to avoid confusion. (see picture below)
If the vehicle is NOT equipped with a factory amplified system, plug in the male 8-pin connector
to the BLACK female 8-pin on the GM-17C module.
The SOCGM-17C has a potentiometer to adjust the chime volume. It is set at half way by
default. To adjust the volume, simply use a suitable screw driver and turn the potentiometer
clockwise to increase the volume and counter-clockwise to decrease the volume.
BOSE
(Amplified)
Connection
Non-BOSE
(Non-
Amplified)
Connection
Chime
Volume
Adjustment
2 / 3


Produkt Specifikationer

Mærke: CRUX
Kategori: Ikke kategoriseret
Model: SOCGM-17C

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX SOCGM-17C stil et spørgsmål nedenfor, og andre brugere vil svare dig