CRUX SWRBM-57K Manual


Læs gratis den danske manual til CRUX SWRBM-57K (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6 anmeldelser. Har du et spørgsmål om CRUX SWRBM-57K, eller vil du spørge andre brugere om produktet?

Side 1/2
RADIO REPL ACEMENT
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.042020
SWRBM-57K
Radio Replacement with SWC Retention for
Select BMW Vehicles with I/K-Line Bus (1991-2006)
1 of 2
PRODUCT FEATURES:
PARTS INCLUDED:
- Retains factory features in select BMW vehicles with I/K-Line Bus while funconing with an
aermarket radio.
- Does not support amplied systems with factory DSP.
- EIA color coded wiring for easy installaon.
SWRBM-57K MODULE SWC Cable
40-Pin Quadlock Harness 17-Pin Slide-Lock Harness
INSTALLATION DIAGRAM:
AFTERMARKET
RADIO
Illumination (+) Orange
Power Antenna/Amp Turn on Blue
+12V Constant Yellow
+12V ACC Red
Ground Black
Right Front (+) Gray
Right Front (-) Gray/Black
Left Front (+) White
Left Front (-) White/Black
Right Rear (+) Violet
Right Rear (-) Violet/Black
Left Rear (+) Green
Left Rear (-) Green/Black
TO FACTORY
HARNESS
12-Pin
Connector
OR Use the proper BM-57K harness
that corresponds to the OEM
harness in the vehicle
40-pin Quadlock
17-pin Slide-Lock
SWRBM-57K
MODULE
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
AFTERMARKET
RADIO SELECTOR
(See Chart)
BMW
SWC SETTING
(OFF OFF OFF OFF)
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
Cap or insulate if
not being used
Kenwood/JVC (BLUE / YELLOW) Insulate with tape
if not being used
3.5MM SWC CABLE
Plug in the 3.5MM SWC cable to the 4-pin port
on the module. See “DIP SWITCH SETTINGS” section.


Produkt Specifikationer

Mærke: CRUX
Kategori: Ikke kategoriseret
Model: SWRBM-57K

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX SWRBM-57K stil et spørgsmål nedenfor, og andre brugere vil svare dig