CRUX VRFBM-77C Manual


Læs gratis den danske manual til CRUX VRFBM-77C (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om CRUX VRFBM-77C, eller vil du spørge andre brugere om produktet?

Side 1/12
With OE type Dynamic Parking Guide Lines
On-screen display and setup
2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC,
rear-view camera, reverse gear)
Rear-view camera input
Front camera input
Front camera input can also be used as an Auxiliary Video Input
Automac switching to rear-view camera input on engagement of reverse gear from all
operaon modes
Forced rear-view camera opon (only on vehicles with PDC buon)
Manual return from rear-view and front camera (cancellaon of automac switching)
Picture-in-picture mode combining aer-market rear-view and front camera picture(s)
with factory parking sensor graphics
Compable wi all factory video accessories (e.g. rear-view camera, DVD-changer, etc.) th
Plug & Play installaon
For the F-series BMW with navigaon system or radio and 6.5”, 7”, 8.8” or 10.25”
monitor with 4+2pin HSD2 LVDS connector
On i3 installaons, part# HAR-i3 is required to install the interface. The interface module
is installed/mounted under the rear seat and you will need to run the HAR-i3 towards
the rear seat.
BM-77C Module
BM-77C Harness
4+2 PIN HSD2 LVDS Cable
Power/CAN Harness
1 / 12
rev.122617
2 / 12
rev.122617


Produkt Specifikationer

Mærke: CRUX
Kategori: Ikke kategoriseret
Model: VRFBM-77C

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX VRFBM-77C stil et spørgsmål nedenfor, og andre brugere vil svare dig