Dormakaba RCI 8 Manual

Dormakaba Ikke kategoriseret RCI 8

Læs gratis den danske manual til Dormakaba RCI 8 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Dormakaba RCI 8, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

I N S T A L L A T I O N

Read and conform to each of the Pre-Installation instructions

supplied with Rutherford Controls electromagnetic lock.

This product must be used only with a Rutherford Controls

electromagnetic lock.

Failure to conform to these requirements is a misuse of the

product and could result in serious bodily injury or property

damage.

1. Open wiring cavity in front of lock. For remote indication

requiring a contact when door is closed, connect the closed

green lead (NC) black lead (COM). and the

For remote indication requiring a contact when door is open

closed, connect the and the red lead (NO) black lead (COM).

2. Install the DSS Reed Switch into the housing. Take care to

slide the Reed Switch to the bottom of the housing to ensure

reliable operation.

NOTE: When connecting to the reed switch leads, the connections

should be soldered or correct size ™ must Marrettes™/Wire Nuts

be used. The ‘DSS’ option reed switch contacts are rated at 0.20A

@ 12VDC and 0.12A @ 24VDC. Do not exceed this rating.

3. Replace standard armature plate with longer DSS armature

plate. Apply thread locking compound to bolt before

re-engaging into sexnut.

NOTE: During installation of the armature plate to the door it is

essential that the armature plate remains movable. The armature

plate must be allowed to pivot on the center-mounting bolt to

allow proper alignment with the magnet surface. If the plate is not

aligned with the magnet surface, the lock may lose holding force

or not lock at all.

The head of the armature mounting bolt ships with a rubber

washer affixed to it. This washer should project slightly beyond

the surface of the armature plate. This is to allow the washer

to expand when power is removed and break the air vacuum

between the plate and the magnet surface. If this washer is

removed or trimmed the lock will appear to have some holding

force even when power is removed.

WARNING: Improper installation, maintenance, inspection

or usage of this or any related product may cause the

electromagnetic lock, armature plate and associated hardware

to disengage and fall, causing serious bodily injury and

property damage. dormakaba Canada Inc. will not be liable to

the installer, purchaser, end user or anyone else for damage or

injury to person or property due to improper installation, care,

storage, handling, maintenance, inspection, abuse, misuse or

act of God or nature involving this or any related product.

8 series

ISDSS PCN18003

R03-18GR-1

Maintenance

This product and all related accessories or parts must be inspected and maintained on a . Contacting surfaces of the electromagnetic quarterly basis

lock and armature plate must be kept free of contaminating materials. Surfaces should be cleaned periodically with a non-abrasive cleaner.

All mounting fasteners must be inspected on a . When properly installed the ends of the armature plate allow a slight movement, but quarterly basis

the plate will feel secure when grasped at the bolt. There should be no movement to the mounting bracket or housing of the electromagnetic lock.

Instructions

(Wiring directly to the ‘DSS’ Option Reed Switch)

DSS RETROFIT

ELECTROMAGNETIC LOCK ACCESSORY

DSS Reed Switch

Position stripe close

to wiring cavity

Inside Details

of Endcap

www.rutherfordcontrols.com • Phone: 1.800.265.6630 • Fax: 1.800.482.9795 • E-mail: sales_RCI@dormakaba.com

Produkt Specifikationer

Mærke:	Dormakaba
Kategori:	Ikke kategoriseret
Model:	RCI 8

Har du brug for hjælp?

Hvis du har brug for hjælp til Dormakaba RCI 8 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Dormakaba Manualer

Dormakaba 3513-DM Manual

29 Juni 2025

Dormakaba Keyscan EC1500 Manual

21 August 2024

Dormakaba RCI S2500A Manual

21 August 2024

Dormakaba EAC Manual

21 August 2024

Dormakaba CLM9000 Manual

21 August 2024

Dormakaba DKX Type III Manual

21 August 2024

Dormakaba 9800 Manual

21 August 2024

Dormakaba HSW-GP Manual

21 August 2024

Dormakaba DKX-10 Manual

21 August 2024

Dormakaba Confidant RFID Kit 1 Manual

21 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IMC Networks 232CL9R Manual

14 September 2025

Varta Speed Charger 57955 Manual

14 September 2025

Melissa & Doug 9336 Manual

14 September 2025

Opus dataPREDATOR Manual

13 September 2025

Varta Wireless Power Bank 20000 57909 Manual

13 September 2025

Daewoo AVS1369 Manual

13 September 2025

SolarEdge SE120K-RW08IBNQ4 Manual

13 September 2025

Varta Fast Wireless Charger 57912 Manual

13 September 2025

Hauppauge Colossus Manual

13 September 2025

Contour Wireless Unimouse Manual

13 September 2025