Draper 15101 Manual

Draper Måling 15101

Læs gratis den danske manual til Draper 15101 (6 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Draper 15101, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

INFRARED

THERMOMETER

15101 – IT12:1B INSTRUCTIONS FOR USE

Original Instructions

Version 1

1. Preface

These are the original product instructions. This document is part of

the product; retain it for the life of the product, passing it on to

subsequent holders. Read this manual in full before attempting to

assemble, operate, or maintain this product.

This Draper Tools manual describes the purpose of the product and

contains all the necessary information to ensure its correct and safe

use. Following all the instructions and guidance in this manual will

ensure the safety of both the product and the operator and increase

the lifespan of the product.

All photographs and drawings within this manual are supplied by

Draper Tools to help illustrate correct operation of the product.

Every eort has been made to ensure the information contained in

this manual is accurate. However, Draper Tools reserves the right to

amend this document without prior warning. Always use the latest

version of the product manual.

1.2 Revisions

Permission is granted to reproduce this manual for personal and

educational use ONLY. Commercial copying, redistribution, hiring,

or lending is strictly prohibited.

No part of this manual may be stored in a retrieval system or

transmitted in any other form or means without written permission

from Draper Tools Limited.

In all cases, this copyright notice must remain intact.

2. Warranty

Draper Tools products are carefully tested and inspected before

shipment and are guaranteed to be free from defective materials

and workmanship.

Should the tool develop a fault, return the complete tool to your

nearest distributor or contact Draper Tools directly. Contact

information can be found at the back of this manual. Proof of

purchase must be provided.

If, upon inspection, it is found that the fault occurring is due to

defective materials or workmanship, repairs will be carried out free

of charge. This warranty period covers parts and labour for 12

months from the date of purchase. Where tools have been hired out,

the warranty period covers 90 days from the date of purchase.

This warranty does not apply to any consumable parts, batteries or

normal wear and tear, nor does it cover any damage caused by

misuse, careless or unsafe handling, alterations, accidents, or

repairs attempted or made by any personnel other than the

authorised Draper Tools repair agent.

In all cases, to make a claim for faulty workmanship or materials

within the standard warranty period, contact or return the product

to the place of purchase. Proof of purchase may be required.

If the place of purchase is no longer trading or if you experience any

diculties with your warranty, please contact Customer Services

with the product details and your proof of purchase. Contact details

can be found at the back of this manual.

If the tool is not covered by the terms of this warranty, repairs and

carriage charges will be quoted and charged accordingly.

This warranty supersedes any other guarantees expressed or

implied and variations of its terms are not authorised.

Your Draper Tools guarantee is not eective until you can produce,

upon request, a dated receipt or invoice to verify your purchase

within the guarantee period.

Please note that this warranty is an additional benet and does not

aect your statutory rights.

Draper Tools Limited

Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com Email: sales@drapertools.com

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK 0822

Version 1: March 2016

First release

Version 2: October 2019

General content updates

Version 3: April 2022

General content updates

Version 4: August 2022

General content and

formatting updates

Always use the latest version of this manual. Download the latest

version from: drapertools.com/manuals

1.3 Understanding the Safety Content in This

Manual

WARNING! – Situations or actions that may result in personal injury

or death.

CAUTION! – Situations or actions that may result in damage to the

product or surroundings.

Important: – Information or instructions of particular importance.

– 2 –

3. Scope

This product is designed to measure the temperature of industrial

equipment and surfaces without making contact.

WARNING! This product is NOT suitable for measuring the

temperature of humans or animals. NEVER point this product directly

at yourself or any other person.

Important: This product is NOT designed for continual temperature

monitoring.

Any other application beyond the conditions established for use will be

considered misuse. Draper Tools accepts no responsibility for improper

use of this product.

Part of our core range, this product is suitable for regular use by

enthusiasts and tradespersons alike.

WARNING! This product is not a toy and must be respected.

Read this manual in full before attempting to use this product and retain

it for later use. Always use the latest version of the manual.

4. Health and Safety Information

Important: Read all the Health and Safety instructions before attempting

to operate or maintain this product. Non-compliance with these

instructions may result in injury.

Important: This product is intended for use as a guide and screening tool

ONLY. For precise readings, a specially engineered tool should be used.

WARNING! This product is not suitable for use on humans or animals.

This product utilises a Class 2 laser. DO NOT stare into the beam or

expose users of telescopic elements.

Viewing the laser pointer output with certain optical instruments (e.g.

eye loupes, magniers and microscopes) with a distance of 100mm

may pose a hazard to the eyes.

Viewing the laser pointer output with certain optical instruments

designed for use at a distance (e.g. telescopes and binoculars) may

pose a hazard to the eyes.

CAUTION! DO NOT touch the thermometer lens as this may damage it

and cause inaccurate readings.

Use of controls or adjustments or the performance of procedures

outside the scope of these instructions may result in radiation

exposure.

• Observe all standard safety precautions and good practices when

working with electrical equipment and batteries.

• Inspect the product before every use for evidence of battery leakage

and corroded parts.

WARNING! DO NOT use this product if any part has corroded or the

battery has leaked. Contact Draper Tools for repair and

replacement options.

• DO NOT allow battery acid to come into contact with your eyes or

skin.

− If contact occurs, ush with plenty of water for at least 15

minutes and seek immediate medical attention.

• NEVER burn, piece or mutilate batteries as this may cause toxic or

corrosive materials to be released.

• DO NOT attempt to modify this product or amplify its output in any way.

• DO NOT stare into the laser.

• DO NOT direct the laser beam towards yourself, another person or

animals; take additional care to avoid their eyes.

• DO NOT direct the laser in a way that may lead to unintentional eye

exposure for passing pedestrians or trac.

• direct the beam onto reective surfaces. DO NOT

• DO NOT expose this product to water or wet environments.

• DO NOT use this product in environments that exhibit a strong

electrostatic or magnetic eld.

• DO NOT use the product in the vicinity of children.

• DO NOT leave this product unattended.

• ALWAYS remove the battery when not in use.

• DO NOT charge non-rechargeable batteries.

5. Specication

Stock No. 15101

Part No. IT12:1B

Distance to spot size 12:1

Accuracy

0~550°C (32~1,022°F) ±1.5°C (±2.7°F)

-55~0°C (-58~32°F) ±3.0°C (±5.0°F)

Power supply 9V battery (supplied)

Operating temp. 0ºC ~ 40ºC (32ºF ~ 104ºF)

Storage temp. -20ºC ~ 60ºC (-4ºF ~ 140ºF)

Typical battery life (Alkaline)

Laser pointer inactive 22h

Laser pointer active 12h

Dimensions W 101 × H 153 × D 43mm

Weight (inc. batteries) 0.148kg

Laser classication Class 2

6. Product Overview

(9)

(6)

(7)

(8)

(10)

(1)

(4)

(2)

(3)

(5)

(1) Trigger

(2) Laser aperture

(3) Thermometer lens

(4) Battery compartment cover

(5) Cover release indents

(6) Control panel

(7) LCD display

(8) Backlight toggle button

(9) Laser pointer power button

(10) Unit toggle button

Produkt Specifikationer

Mærke:	Draper
Kategori:	Måling
Model:	15101

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper 15101 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Draper Manualer

Draper 15101 Manual

16 Juni 2025

Draper 24703 Manual

7 Juni 2025

Draper 35879 Manual

7 Juni 2025

Draper Expert 10958 Manual

7 Juni 2025

Draper 24702 Manual

6 Juni 2025

Draper Expert 07088 Manual

6 Juni 2025

Draper 88988 Manual

6 Juni 2025

Draper 10200 Manual

6 Juni 2025

Draper 27198 Manual

6 Juni 2025

Draper Expert 66249 Manual

6 Juni 2025

Måling Manualer

Nyeste Måling Manualer

Mitsubishi SRK53DDH1 Manual

16 Juni 2025

Smart365 SM-06-05030 Manual

16 Juni 2025

ORNO OR-PZ-465 Manual

16 Juni 2025

Smart365 SM-06-01100 Manual

15 Juni 2025

Ermenrich NetGeeks NP40 Manual

15 Juni 2025

Ermenrich Zing ST30 Manual

15 Juni 2025

Ermenrich NG35 Manual

15 Juni 2025

ORNO OR-PZ-466 Manual

15 Juni 2025

Ermenrich Reel PRO GM100 Manual

15 Juni 2025

Uni-T UT620T Manual

15 Juni 2025