Draper Expert 10958 Manual
Læs nedenfor 📖 manual på dansk for Draper Expert 10958 (4 sider) i kategorien Måling. Denne guide var nyttig for 3 personer og blev bedømt med 4.7 stjerner i gennemsnit af 2 brugere
Side 1/4
EN
Original Instructions
Version 1
November 2024
DIGITAL
EXTERNAL
MICROMETER
10958
User Manual for: Digital Micrometer
Stock No: 10958
Part No: DEM1
Read this manual in full before using this product and
retain it for future use. Always use the latest version of
the manual. Please visit for drapertools.com/manuals
the latest version.
1. Intended Use
This product is designed as a digital external micrometer to
carry out both metric and imperial measurements.
Any other application beyond the conditions established for
use will be considered misuse. Draper Tools accepts no
responsibility for improper use of this product.
This product is suitable for use by enthusiasts and
tradespersons alike.
2. Specication
Stock No. 10958
Part No. DEM1
Scale range: 0 – 25mm/0 – 1"
Measuring Force: 5 – 10N
Resolution: 0.001mm/0.00005"
Battery Power: 1 X CR2032 3V (not supplied)
Operating Temperature: 0 to 40°C
Storage Temperature: -20 to 60°C
3. HealthandSafety
Information
Important: Read all the Health and Safety instructions
before attempting to operate, maintain or repair this
product. Failure to follow these instructions may result in
injury or damage to the user or the product.
WARNING! Ensure Health and Safety, local authority
and general workshop practice regulations are
adhered to when using tools and equipment.
• DO NOT use the micrometer if damaged.
• DO NOT use the micrometer for any purpose other
than for which it is designed.
• DO NOT expose to damp or wet conditions.
• DO NOT dip or submerge in any type of liquid.
• DO NOT expose the micrometer to bright sunlight
or dust.
• DO NOT modify or dismantle the micrometer.
The device must be checked by qualied service
personnel only.
• DO NOT use the micrometer near strong
magnetic elds or high voltage.
• The micrometer is a precision instrument,
treat with care, avoid using force and do not subject
to knocks or shocks.
• When not in use, store in a safe, dry,
childproof location.
4. Identication
1. Frame
2. Anvil
3. Spindle
4. Locking device
5. Ratchet thimble
6. Quick drive
7. Display screen
8. ABS/Unit (mm/Inch)
button
9. ON/OFF/SET button
10. Battery
compartment/cap
11. Storage case
12. Ball end cap
13. Battery
compartment key
Preface
– 2 –
(10)
(6)
(5)
(4)
(3)
(2)
(7)(8)(9)(1)
(13)
(11)
(12)
Produkt Specifikationer
| Mærke: | Draper |
| Kategori: | Måling |
| Model: | Expert 10958 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Draper Expert 10958 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Måling Draper Manualer
7 Juni 2025
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
Måling Manualer
- Måling X4-LIFE
- Måling Tru Components
- Måling Metrix
- Måling Kopul
- Måling Kopp
- Måling Projecta
- Måling Adwa
- Måling Smartwares
- Måling Megger
- Måling Sauter
- Måling Stabila
- Måling Contec
- Måling TDE Instruments
- Måling Bosch
- Måling Sikkens
Nyeste Måling Manualer
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025