Duravit Ketho KT665004949 Manual

Duravit Ikke kategoriseret Ketho KT665004949

Læs gratis den danske manual til Duravit Ketho KT665004949 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Duravit Ketho KT665004949, eller vil du spørge andre brugere om produktet?

Side 1/6
Ketho
# KT 6650
Installation instructions
Leben im Bad
Living bathrooms
Instructions for use
The bathroom furniture range complies with the standards and guidelines applicable at the time of delivery and is designed for use in bathrooms.
Though designed for the wet environment, direct contact with water should be avoided, for example, when showering.
MAL_Ketho_KT6650/16.12.1
175
850
280
80
615
565
130 55
24 1/4”
22 1/4”
33 1/2”
3 1/8”
11”
6 7/8”
5 1/8”
2 1/8”
A A B B
mm inch mm inch
600 23 5/8” 376 14 3/4”
# 034265
2x S8
2x 5x50
# 0050260000
# 034265
2x 100
4x S8
4x 5x50
# F30368# F23628
MAL_Ketho_KT6650/16.12.1
1 2 3
4
5 6 7
Reference the washbasin
specification to establish the
position of mounting bolts,
mark the holes to be drilled for
the anchors.
Using a 3/8“ and 5/8“ drill bit,
drill the anchor holes that
have been marked.
The plastic anchors provided
are for concrete wall
applications.
For wood stud walls, bolts should
be screwed into wood backing.
When mounting the washbasin
into a wood stud wall, there
must be adequate bracing. We
recommend doubling up 2 x 6’s
or 2 x 8’s between the studs to
form a solid anchoring point.
Screw mounting bolts into the
pre drilled holes with an
adjustable wrench. Screw in
the full length of the mounting
bolt, so that the lag thread is
no longer visible. Carefully slide
washbasin onto the mounting
bolts. Insert the white plastic
sleeve over bolt and into the
hole in the washbasin. Install
provided washer and nut.
Hand tighten the nut,
so the washbasin is secure.
Install the siphon.
Remove the vanity drawer. Using a screwdriver, adjust
the vanity mounting hinge
system clockwise.
8
Slide the vanity under the
washbasin.
Tighten mounting bolts with a
wrench until the washbasin
is stable.


Produkt Specifikationer

Mærke: Duravit
Kategori: Ikke kategoriseret
Model: Ketho KT665004949

Har du brug for hjælp?

Hvis du har brug for hjælp til Duravit Ketho KT665004949 stil et spørgsmål nedenfor, og andre brugere vil svare dig