Wireless Over-Ear Headphones with Active Noise Cancellation
Model: EDF200168
WH700NB Pro
Manual
EN 1. Power ON/OFF
Press and hold the power button to power on/o.
2. First pairing
1. Once powered on, the headphones will automatically enter
Bluetooth pairing mode.
2. Select "EDIFIER WH700NB Pro" in your device settings to connect.
1. In ON state, press and hold the " " button for about 3 seconds to
enter Bluetooth pairing mode.
2. Select "EDIFIER WH700NB Pro" in your device settings to connect.
Note: For subsequent use, the headphones will automatically connect to the device used last time.
3. Pairing for new device
1. Pair device A with the headphones successfully.
2. Press and hold the " " button for 3 seconds to re-enter Bluetooth
pairing mode, and then select "EDIFIER WH700NB Pro" in device B
settings to connect.
3. Select "EDIFIER WH700NB Pro" again in device A settings to connect.
Note: For subsequent use, the headphones will automatically reconnect to the two devices used
last time.
4. Multipoint connection
5. Controls
Note:
1. "x 1" Press , "x 2" Double press , "—" Press and hold;
2. Default sound control: High Noise Cancellation / Ambient Sound / Noise Cancellation O.
3. Download EDIFIER ConneX App for more customizable control settings.
Connect to the headphones via the USB-C cable. Wired listening will
automatically disable Bluetooth mode.
8. Wired listening
● Call
● Music
● Mode
x1
x1
x1
x2
x2
x1
x1
x2
x1
In ON state, press "+" and ''-'' buttons for 5s to nish reset, then
headphones will automatically enter Bluetooth pairing mode if
successful.
6. Reset
x6
5s
EDIFIER WH700NB Pro
Bluetooth
3s
①
②
③
EDIFIER WH700NB Pro
Bluetooth
A
EDIFIER WH700NB Pro
Bluetooth
A
B
3s
ON
OFF
-
-
1s
1s
EDIFIER WH700NB Pro
Bluetooth
7. Charging
Input: 5V 1A
Connect the headphones to a power source via the USB-C cable for
charging.
Note: 1. Make sure the USB-C po is completely d before charging.
2. When charging with a USB-C cable, the product is used as wired headphones and
Bluetooth functions are unavailable.