EK Water Blocks EK-Loop D5 Pump Mounting Kit Manual

EK Water Blocks Ikke kategoriseret EK-Loop D5 Pump Mounting Kit

Læs gratis den danske manual til EK Water Blocks EK-Loop D5 Pump Mounting Kit (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 28 anmeldelser. Har du et spørgsmål om EK Water Blocks EK-Loop D5 Pump Mounting Kit, eller vil du spørge andre brugere om produktet?

Side 1/8
USER GUIDE
EK-Loop
D5 Pump Mounting Kit
This product is intended for installation only by expert users.
Please consult with a qualied technician for installation. Improper
installation may result in damage to your equipment. EK Water Blocks
assumes no liability whatsoever, expressed or implied, for the use of
these products, or their installation. The following instructions are
subject to change without notice. Please visit our website at www.
ekwb.com for updates. Before installation of this product, please
read the important notice, disclosure, and warranty conditions that
are printed on the back of the box.
Before you start using this product, please follow these basic guidelines:
Please carefully read the manual before beginning the
installation process.
The use of corrosion-inhibiting coolants is always
recommended for liquid cooling systems, and mandatory for
nickel-plated water blocks.
Do not use pure distilled water! For best results, EK
recommends the use of EK-Cryo Fuel coolants.
Make sure to thoroughly bleed air out of your water block, or
you will not reach optimal performance.


Produkt Specifikationer

Mærke: EK Water Blocks
Kategori: Ikke kategoriseret
Model: EK-Loop D5 Pump Mounting Kit

Har du brug for hjælp?

Hvis du har brug for hjælp til EK Water Blocks EK-Loop D5 Pump Mounting Kit stil et spørgsmål nedenfor, og andre brugere vil svare dig