Electro-Voice HM2 Manual

Electro-Voice Mikrofon HM2

Læs gratis den danske manual til Electro-Voice HM2 (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Electro-Voice HM2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

HM2

Headworn Microphone

Technical Specifications:General Description:

The Electro-Voice HM2 headworn microphone is the ideal

microphone for anyone who requires high-quality vocals in a

hands-free application. The HM2 is perfect for use by lead

vocalists, singing instrumentalists, dancers, aerobic instructors

and other presenters.

The HM2 has a miniature electret condenser element designed

with a cardioid polar pattern, which attenuates background noises

such as sound from nearby floor monitors, on-stage musical

instruments and crowd noise. The furnished open-pore

windscreen slips over the microphone element to reduce wind

noise and minimize P-popping – the excessive explosive breath

noise caused by overemphasized “p” and “t” sounds.

The Electro-Voice HM2 headworn microphone employs a

comfortable and inconspicuous behind-the-head headband and

flexible boom arm in an attractive Nonreflective black matte finish.

The flexible boom, which descends from the right of the headband,

is enclosed with protective shrink tubing to shield the boom arm

from deterioration and to prevent the flexible tube from catching

on facial hair. The facial features of the performer or speaker will

not be obstructed due to the HM2’s unobtrusive design. The

headband and microphone boom adjust to fit any performer or

speaker.

The HM2 is designed to have a frequency response similar to a

handheld vocal microphone. The HM2 headset exhibits bass-

boost (proximity-effect) warmth that many vocalists prefer. The

amount of proximity effect can be adjusted by moving the

microphone element closer or farther away from the mouth.

The HM2 is permanently connected to a 1.2-m (4 ft) shielded

cable terminated with a miniature Switchcraft TA3F connector.

Key Features:

• Lightweight – just 0.9 ounces (25

grams), less cable

• Behind-the-head headband is com-

fortable and stays in place

• Cardioid pickup pattern ensures good

gain before feedback

• Frequency response and proximity

effect similar to handheld vocal mics

tnemelEgnitareneG resnednoCtertcelE

esnopseRycneuqerF

:)ecnatsid.ni-2/1( zH000,81-03

egatlovtiucricnepo(ytivitisneS

:)zH0001ta 086(lacsaP/Vm4 )daolΩ

:nrettaPraloP dioidraC

:noitrotsiD%1,LPSmumixaM Bd021

:stnemeriuqeRrewoP cdV01ot1

:cdV9tatnerruCgnitarepO 005 xamAµ

:hsiniF kcalbevitcelfernoN

:elbaCtuptuO

mm5.2,gnol)tf4(m2.1

erutainim;retemaid).ni01.0(

yltnenamrepelbacoidua

enohporcimneewtebdehcatta

rotcennocdna

:rotcennoCtuptuO

,dleihs1nip(F4ATtfarchctiwS

3nip,oidua/saib4&2nip

)C/N

:dehsinruFseirosseccA neercsdniwkcalB

:seirosseccAlanoitpO VEneercsdniwtnemecalpeR

551978.ontrap

:dnabdaeH,snoisnemiD

talanimon).ni5.5(mm041

).ni6(mm061:tnioptsediw

mramoob

:enohporciM,snoisnemiD

mm81,gnol).ni41.1(mm92

66.0(mm8.61,ediw).ni7.0(

peed).ni

dnaelbacssel(thgieWteN

:)rotcennoc )zo9.0(smarg52

Microphone Placement:

The headband can be worn in several different ways: Over the top of the

head. (Some aerobics instructors prefer this because they wear their

sweatband perpendicular to the headband.) Behind the back of the

neck. (This lets you hide the headset in your hair very easily.)

The flexible boom allows adjustment relative to the right corner of your

mouth. To find the optimum location of the microphone, perform the

following steps during the sound check:

1. Center the microphone element in front of your mouth by

bending the flexible boom up or down.

2. If P-popping is detected, bend the flexible boom and move the

microphone element further away from you mouth.

3. If the sound is thin and weak, move the microphone element

closer to your mouth and try raising or lowering the microphone

element.

Experiments indicate that the best control of P-popping is to position the

microphone element off to the side of the mouth, away from the center.

If distortion or flawed audio is heard, check the overload LED on the

transmitter. If the LED is flashing with voice peaks, adjust the

transmitter’s attenuation control until the overload stops. Also, check

the condition of the transmitter’s battery and replace if necessary.

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 887-9212

For warranty repair or service information, contact the Service Repair department at:

800/685-2606

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

12000 Portland Avenue South, Burnsville, MN 55337

Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

Part Number 38109-890 Rev A

Warranty (Limited):

Electro-Voice products are guaranteed against malfunction due to defects

in materials or workmanship for a specified period, as noted in the

individual product-line statement(s) below, or in the individual product

data sheet or owner’s manual, beginning with the date of original

purchase. If such malfunction occurs during the specified period, the

product will be repaired or replaced (at our option) without charge. The

product will be returned to the customer prepaid. Exclusions and

Limitations: The Limited Warranty does not apply to: (a) exterior finish or

appearance; (b) certain specific items described in the individual product-

line statement(s) below, or in the individual product data sheet or owner’s

manual; (c) malfunction resulting from use or operation of the product

other than as specified in the product data sheet or owner’s manual; (d)

malfunction resulting from misuse or abuse of the product; or (e)

malfunction occurring at any time after repairs have been made to the

product by anyone other than Electro-Voice or any of its authorized

service representatives. Obtaining Warranty Service: To obtain warranty

service, a customer must deliver the product, prepaid, to Electro-Voice or

any of its authorized service representatives together with proof of

purchase of the product in the form of a bill of sale or receipted invoice. A

list of authorized service representatives is available from Electro-Voice

at 8601 E. Cornhusker Hwy., Lincoln, NE 68507 (402/467-5321 or 800/

553-5992 or Fax 402/467-3279) and/or Electro-Voice West, at 8234

Doe Avenue, Visalia, CA 93291 (209/651-7777 or 800/825-1242).

Incidental and Consequential Damages Excluded: Product repair or

replacement and return to the customer are the only remedies provided

to the customer. Electro-Voice shall not be liable for any incidental or

consequential damages including, without limitation, injury to persons

or property or loss of use. Some states do not allow the exclusion or

limitation of incidental or consequential damages so the above limitation

or exclusion may not apply to you. Other Rights: This warranty gives you

specific legal rights, and you may also have other rights which vary from

state to state.

Electro-Voice Wireless Systems are guaranteed against malfunction

due to defects in materials or workmanship for a period of one (1) year

from the date of original purchase. The Limited Warranty does not extend

to cables or cable connectors. Additional details are included in the

Uniform Limited Warranty Statement.

Service and repair address for this product: Electro-Voice, Inc., 8601 E.

Cornhusker Hwy., Lincoln, NE 68507 (402/467-5321 or 800/553-

5992 or Fax 402/467-3279).

Specifications subject to change without notice.

Frequency Response (at 1/2-inch):

Polar Response:

Produkt Specifikationer

Mærke:	Electro-Voice
Kategori:	Mikrofon
Model:	HM2

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro-Voice HM2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrofon Electro-Voice Manualer

Electro-Voice WSPL-1 Manual

12 Januar 2025

Electro-Voice RE92L Manual

3 Januar 2025

Electro-Voice PL44 Manual

30 December 2025

Electro-Voice ND44 Manual

12 September 2024

Electro-Voice RE420 Manual

9 August 2024

Electro-Voice R300-E Manual

3 August 2024

Electro-Voice ND76S Manual

2 August 2024

Electro-Voice ND96 Manual

2 August 2024

Electro-Voice ND76 Manual

26 Juli 2024

Electro-Voice PL80a Manual

26 Juli 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

Vonyx VDM10 Manual

19 Juni 2025

DAP-Audio CM-10 Manual

19 Juni 2025

Tracer Gamzeone Gamer LED USB Manual

18 Juni 2025

Omnitronic UHF-600 Manual

17 Juni 2025

Rane GM 16 Manual

15 Juni 2025

Kogan KAGMICBOMLA Manual

15 Juni 2025

Omnitronic UHF-601 Manual

14 Juni 2025

Omnitronic UHF-604 Manual

14 Juni 2025

Omnitronic UHF-602 Manual

14 Juni 2025

Neewer VM11 Manual

14 Juni 2025