Elektrobock PT23 Manual


Læs gratis den danske manual til Elektrobock PT23 (8 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Elektrobock PT23, eller vil du spørge andre brugere om produktet?

Side 1/8
PT23
for all types boilers with
ON / OFF
weekly program (preset)
6 temp. changes per every
day
anti-freeze mode
easy installation
modern design
LARGE WELL-ARRANGED DISPLAY
WITH TOUCHING CONTROL
ROOM THERMOSTAT
WITH BACKLIT DISPLAY
2
DESCRIPTION
PT23 is digital room thermostat with backlit display for automatic regulation of heating.
Its advantages involve a quick change in the desired temperature by simply press the button, and
possibility of setting up to weekly program with 6 temperature changes per day.
INSTALLATION
LOCATION
Install the thermostat at a suitable place where its operation cannot be affected by direct  ow of
hot air from the heater, sunshine or other disturbing effects. Do not install it on an external wall
either. The installation height should be approx. 1.5 m above the oor. Place the thermostat in
the “reference room”, such as the living room (the heating source will switch according to the
temperature in this room).
1. Switch off the main circuit breaker.
2. Remove the control part from the lower cover of the device (Fig.1).
3. Chip away the central plastic piece from the lower cover to lead in conductors.
4. Run the conductor through the hole and connect it to the terminal acc. to the diagram.
5. Fasten the lower cover to the wiring box with screws (Fig. 2).
6. Batteries are located at the back of the control part. Remove their protective paper (on  rst use), or insert new
batteries (Fig. 3).
7. Mount the control part on the lower cover.
8. Switch on the main circuit breaker and test correct connection of the thermostat, see page 5 (TEST).
9. Upon  rst start (or reset), the thermostat displays “SET CLOCK”, set the current time and date according to page 4.
Wiring diagram:
Backlit display
if any button is
pushed, the backlit
switches on
automatically for 5 s
at least
Control elements
by pressing
= con rmation of
value chagne
by pressing
= entering of main
menu or one step
back
by pressing
= changing the
set value
*The thermostat terminals
are marked differently with
every type of boiler.
Therefore, follow the
wiring prescribed
by the boiler
manufacturer!
*
BOILER


Produkt Specifikationer

Mærke: Elektrobock
Kategori: Termostat
Model: PT23

Har du brug for hjælp?

Hvis du har brug for hjælp til Elektrobock PT23 stil et spørgsmål nedenfor, og andre brugere vil svare dig