Elite Screens DIY Pro 133" Manual

Elite Screens Projektionsskærm DIY Pro 133"

Læs gratis den danske manual til Elite Screens DIY Pro 133" (3 sider) i kategorien Projektionsskærm. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Elite Screens DIY Pro 133", eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Rev. 081617BR www.elitescreens.com 1

Do-it-Yourself Outdoor Projection Screen

DIY

DIYDIY/DIY

/DIY

/DIY/DIY Pro

Pro

Pro Pro

Screen Ser

Screen SerScreen Series

ies

iesies

User’s Guide

Thank you for choosing the DIY Screen Series portable projection screen! Please read through this user

guide before utilizing the screen. Correct usage and maintenance will ensure a long product life

Please make sure all parts listed below are included before proceeding with the installation.

What’s included?

A. DIY Outdoor Screen

Material x 1

B. Dynamic Rope x 4

C. Polypropylene Rope

D. Screen Material

Bag

Setup Procedure

PLEASE NOTE: Prolonged storage of the DIY Screen Series in its factory packaging may result in

having noticeable horizontal lines on its surface. The lines are identified as “Memory Lines”. The

Memory Lines can be eliminated by leaving the screen in the down position for a few days after the

installation. This allows the material to stretch out. After the few days of leaving the screen

installed, the Memory Lines should vanish without return.

There are many unique ways for the DIY/DIY PRO to be installed. Below is a general guideline for the

installation of the screen. Please note that a frame is not included with the DIY/DIY PRO screen.

1. Unroll the screen material (A) on a clean surface.

2. Insert the Polypropylene rope (C) through each grommet in the material and attach to the

installation location.

Rev. 081617BR www.elitescreens.com 2

(Image below - is of DIY Pro Series Actual screen appearance on series and model number)will vary based

Tightly fasten the Polypropylene rope (C) throughout each grommet to make the screen flat while

fastening the rope to the installation location. Do several tests to ensure the rope stretches the

material to its maximum extent. Once the approximate length of rope that is needed can be

determined, remove any excess rope by simply cutting it.

Note: Wrap rope with tape before cutting

3. T he Dynamic Rope (B) (bungee cord) can be attached to each of the four corners of the

material and to the support structure to create a more secure installation while at the same

time stretching the material he elasticity o. When placed at each corner, t f the cord will

tension the screen making it more at providing a more uniform surface.

For more information, technical support or your local Elite

Screens contact, please visit www.elitescreens.com

Note: The Screen material is not designed to be left outdoors for an extensive period of

time. Leaving the screen outdoors will result in a reduced lifespan of the screen material. To

prevent damage caused by the outdoor elements, we recommend that you disassemble the

screen after each use and store it indoors.

Produkt Specifikationer

Mærke:	Elite Screens
Kategori:	Projektionsskærm
Model:	DIY Pro 133"
Bredde:	3010 mm
Højde:	1729 mm
Vægt:	- g
Produktfarve:	Hvid
Naturligt aspektforhold:	16:9
Materiale:	PVC
Monteringstype:	Væg
Fjernbetjent:	Ingen
Drevtype:	Vejledning
Synlig skærmbredde (W):	2930 mm
Synlig skærmhøjde (H):	1649 mm
Samlet skærmstørrelse (højde x bredde):	164.9 x 293 cm
Diagonal:	133 "
Skærmforstærkning:	1.1