Emos MD-220 Manual

Emos Multimeter MD-220

Læs gratis den danske manual til Emos MD-220 (24 sider) i kategorien Multimeter. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Emos MD-220, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

2202003000_31-M2092_00_01 148 × 210 mm

www.emos.eu

M2092 | MD-220

GB Digital Multimeter

CZ Digitální multimetr

SK Digitálny multimeter

PL Multimetr cyfrowy

HU Digitális multiméter

SI Digitalni multimeter

RS|HR|BA|ME Digitalni multimetar

DE Digitales Multimeter

UA Цифровий мультиметр

RO Multimetru digital

LT Skaitmeninis multimetras

LV Digitālais Multimetrs

EE Digitaalne multimeeter

BG Цифров мултиметър

GB | Digital Multimeter

Multimeter MD-220 is a compact, battery-powered, user-friendly

device for measuring alternating and direct current, voltage and

electrical resistance, for testing diodes and transistors and for sound

testing of conductivity. The multimeter was designed in accordance

with the IEC-61010 standard regarding electronic measuring devices

in the category (CAT III 600 V), 2nd degree of pollution.

The CAT III category is used to measure circuits powered by a xed

output power supply, such as a relay, socket, switchboards, power sup-

plies, short branching circuits and lighting systems in large buildings.

Safety Instructions

• Read this manual thoroughly before using the multimeter.

• Always check the connection of testing conductors and measuring

range settings.

• Do not exceed the maximum input limits:

• for AC and DC voltage: 600 V

• for alternating and direct current: 10 A

• Before changing the measuring range (function), disconnect the

conductors from the measured circuit.

Main Features

LCD display: maximum displed value 1999 (3 and 0.5 digits) with

automatic polarity indication

Measuring method: dual – reacts to the pulse leading and trailing

edge

Maximum standard mode: 500 V DC/AC ms

Reading frequency: approx. 2–3 readings per second

Operating temperature: 23°C ±5°C

Temperature range: operating 0°C to +40°C; storage –10°C to

+50°C

Power supply: 9 V battery (1604 or 6F22). The status of the battery

is indicated by the icon on the left side of the display

Dimensions and weight: 85 × 165 × 32 mm, 250 g (including the 9

V battery)

Accessories: Instruction manual, measuring tips

Operating Procedure

a. If the device does not turn on (the display does not light up) or

if the symbol appears on the display upon turning on the

device, the battery is completely drained. Replace the battery.

b. When measuring quantities for which a symbol is displayed

below the measuring tip connection sockets, do not exceed the

measuring range (risk of damaging the device).

c. If you do not know the approximate voltage or current value

beforehand, set the measuring range to maximum and grad-

ually decrease it as you measure.

d. If the measuring range is exceeded (the display shows the

number "1"), switch to a higher range.

e. Avoid contact with high voltage.

Measuring Direct (DC) Voltage

1. Connect the black measuring tip to the socket labelled as "COM"

and the red conductor to the socket labelled as "V/Ω".

2. Switch to the function marked as V . Choose a measuring range

and place the measuring tips where you wish to measure DC volt-

age. The voltage value and polarity will be shown on the display.

Follow points c), d), e) of the Operating Procedure!

Range Accuracy Deviation

200 mV ±0.5 % of reading

± 1 counts 100 μV

2 V

±0.5 % of reading

± 3 counts

1 mV

20 V 10 mV

200 V 100 mV

600 V ±0.8 % of reading

± 2 counts 1 V

Input impedance: 10 MΩ for all ranges

Overload protection: 250 V rms of peak voltage at 200 mV and

600 V rms in all other ranges.

Measuring Alternating (AC) Voltage

1. Connect the black measuring tip to the socket labelled as "COM"

and the red conductor to the socket labelled as "V/Ω".

2. Switch to the function marked as V~. Choose a measuring range

and place the measuring tips where you wish to measure AC

voltage. The measured values will be displayed.

Follow points c), d), e) of the Operating Procedure!

Range Accuracy Deviation

2 V

±0.8 % of reading

± 3 counts

1 mV

20 V 10 mV

200 V 100 mV

600 V ±1.2 % of reading

± 3 counts 1 V

Input impedance: 10 MΩ for all ranges

Frequency range: 40 Hz to 400 Hz

Overload protection: 600 V of peak voltage in all ranges

Measuring Direct Current

1. Connect the black measuring tip to the socket labelled as "COM"

and the red conductor to the socket labelled as "mA". To measure

maximum current (up to 10 A), connect the red conductor to the

socket marked as 10 A.

2. Switch to the function marked as A . Choose a measuring range

and place the measuring tips where you wish to measure DC cur-

rent. The current value and polarity will be shown on the display.

• Maximum input current of 200 mA or 10 A depends on which

socket the red measuring tip is plugged into. Excessive current

will destroy the fuse. In that case, it has to be replaced. The 10

A range is not protected by a fuse and can be measured for a

maximum of 15 s, maximum voltage drop of 200 mV.

Follow points c), d) of the Operating Procedure!

Range Accuracy Deviation

2 mA ±0.8 % of reading

± 1 count

1 μA

20 mA 10 μA

200 mA ±1.2 % of reading

± 1 count 100 μA

10 A ±2 % of reading

± 5 counts 10 μA

Overload protection: F 0.2 A/250 V fuse, (10 A range without fuse)

Maximum input current: 10 A, 15 seconds

Measuring Alternating Current

1. Connect the black measuring tip to the socket labelled as "COM"

and the red conductor to the socket labelled as "mA". To measure

maximum current (up to 10 A), connect the red conductor to the

socket marked as 10 A.

2. Switch to the function marked as A~. Choose a measuring range

and place the measuring tips where you wish to measure AC cur-

rent. The current value and polarity will be shown on the display.

• Maximum input current of 200 mA or 10 A depends on which

socket the red measuring tip is plugged into. Excessive current

will destroy the fuse. In that case, it has to be replaced. The 10

A range is not protected by a fuse and can be measured for a

maximum of 15 s, maximum voltage drop 200 mV.

Follow points c), d) of the Operating Procedure!

Range Accuracy Deviation

2 mA ±1.2 % of reading

± 3 counts

1 μA

20 mA 10 μA

200 mA ±2 % of reading

± 3 counts 100 μA

10 A ±3 % of reading

± 7 counts 10 mA

Overload protection: F 0.2 A/250 V fuse, (10 A range without fuse)

Maximum input current: 10 A, 15 seconds

Frequency: 40 Hz to 400 Hz

Maximum voltage drop: 200 mV

Indicates average value of sine waves.

Produkt Specifikationer

Mærke:	Emos
Kategori:	Multimeter
Model:	MD-220

Har du brug for hjælp?

Hvis du har brug for hjælp til Emos MD-220 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Multimeter Emos Manualer

5 September 2024

10 August 2024

7 August 2024

6 August 2024

2 August 2024

1 August 2024

1 August 2024

12 Juli 2024

17 Februar 2024

30 December 2023

Multimeter Manualer

Nyeste Multimeter Manualer

Sauermann AMI 310 Manual

13 August 2025

Sauermann MP 210 Manual

13 August 2025

Bosch RM 3 Professional Manual

6 August 2025

Uni-T UT197PV Manual

5 August 2025

Fluke 17xx Manual

2 August 2025

Fluke 5550A Manual

2 August 2025

Kyoritsu KEW 2210R Manual

2 August 2025

Fluke T+ Manual

1 August 2025

Trotec BE60 Manual

1 August 2025

Kyoritsu K2413F Manual

1 August 2025