Emos P4525 Manual


Læs gratis den danske manual til Emos P4525 (20 sider) i kategorien Lommelygte. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Emos P4525, eller vil du spørge andre brugere om produktet?

Side 1/20
1450000240_31-P4525_00_01 148 × 210 mm
www.emos.eu/download
P4525 | E708A-COB+5
GB LED Work Light
CZ LED pracovní svítilna
SK LED pracovné svietidlo
PL Lampa warsztatowa LED
HU LED-es munkalámpa
SI Delovna LED svetilka
RS|HR|BA|ME LED radna svjetiljka
DE LED-Arbeitsleuchte
UA Світлодіодний робочий ліхтарик
RO|MD Lampă LED de lucru
LT Darbinis šviesos diodų žibintas
LV LED lukturis darbam
EE LED-töötuli
BG LED pаботна лампа
2
GB | LED Work Light
The rechargeable lantern is resistant to rough conditions (dust,
dirt) and is therefore suitable for technicians, handymen and
cottagers, as well as for use in the car. The lantern has 3 pow-
erful magnets and a hook for hanging. The bottom portion
of the lantern can be rotated 180°. The rear of the lantern is
tted with a warning triangle. Its lighting is independent of
the lantern being turned on or o. The lamp can be charged,
or recharged, from a 230 V AC, 50 Hz network or from a car
socket with 12 V DC.
1. Switch
2. LED recharge indicator
3. Hook (360°)
4. Socket for charging
5. Switch – warning triangle
6. Magnet
Specications:
Source of light: COB LED + 5× Ø 5 mm LED
Accumulator pack: Li-Ion 18650–3.7 V DC/2 000 mAh
Power adapter: type SD-G0501000D; input 230 V AC, 50 Hz,
output 5 V DC/1 000 mA
Recharging from car: 12 V DC
Power adapter for car: car adapter, input: 12 V DC,
output: 5V DC/1 000 mA
Lantern operating temperature: -5°C to +45°C
Lantern charging temperature: +5°C to +45°C
Lantern size: 67 × 76 × 317 mm
Lantern weight: 537 g
Recharging the accumulator:
Before rst use or if the lantern does not light up anymore, it
is necessary to charge the lantern. Charging a fully depleted
accumulator pack takes approximately 3 hours. Recharge the
lantern in dry indoor areas.
1. Connect the power adapter (type SD-G0501000D)
to a 230 V AC, 50 Hz network.
2. Turn the switch on the lamp to the o position.
3. Connect the network power adapter into the lamps
power connector – a red light will turn on on the lantern.
When the lamp (accumulator) is fully recharged, the LED
will turn green.
4. After recharging disconnect the adapter from the lantern.
The accumulator can be recharged intermittently – it has
no memory eect.
5. The lantern can also be recharged in a car 12 V DC
through the lighter socket. Procedure for plugging in and
recharging is similar as when using a network adapter.
After recharging, disconnect the car adapter.
The LED light sources have a 50 000 hour service life and
therefore are not replaceable. After exhausting, the entire
lamp can be disposed of.
Changing the accumulator:
The accumulator should only be changed by a skilled user,
ideally with qualications in electrical engineering.
1. When changing the accumulator, turn the lantern switch
to the o position.
2. Carefully remove covers from the sides of the lamp.
3. Disassemble the lantern remove screws located on the
lamp body.
5× LED 15 lm 26 h 24 m
COB LED
270 lm 4 h 22 m
500 lm 2 h 30 m


Produkt Specifikationer

Mærke: Emos
Kategori: Lommelygte
Model: P4525

Har du brug for hjælp?

Hvis du har brug for hjælp til Emos P4525 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lommelygte Emos Manualer

Emos

Emos P4531 Manual

11 December 2024
Emos

Emos P4539 Manual

11 December 2024
Emos

Emos P4110 Manual

11 December 2024
Emos

Emos P4544 Manual

5 September 2024
Emos

Emos P4543 Manual

2 September 2024
Emos

Emos P4542 Manual

2 September 2024
Emos

Emos P4541 Manual

31 August 2024
Emos

Emos P4525 Manual

16 August 2024
Emos

Emos P4532 Manual

10 August 2024
Emos

Emos P4518 Manual

10 August 2024

Lommelygte Manualer

Nyeste Lommelygte Manualer