Energy Sistem Linnker 5000 Manual

Energy Sistem Hovedtelefoner Linnker 5000

Læs gratis den danske manual til Energy Sistem Linnker 5000 (4 sider) i kategorien Hovedtelefoner. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Energy Sistem Linnker 5000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

User’s Guide

1.Assemble and disassemble the ear-hook

with the Headset

(1)To assemble the ear-hook with the

Headset, push the toggle of the ear-phone

into the pin-hole of the ear-hook. To disassemble the ear-hook with the Headset, just

turn and pull out the toggle of the ear-phone from the pin-hole of the ear-hook.

(Please refer to Fig.1)

(2)Fit the ear-hook with your right or left ear. (Please refer to Fig.2, Fig3, Fig4, and

Fig.5)

Fig.1 Fig.2 Fig.3 Fig.4 Fig.5

2.Charging the battery:

(1)The Plug the travel charger into the AC outlet and then connect the charger

into the DC input of the headset. The red indicator of the

headset will light on. When the battery is full, the red

indicator will be off. Disconnect the adaptor from the headset.

When the battery is new, it is not fully charged. It takes nearly

4 hours to fully charge the battery. Afterwards, it will take

nearly 2 hours to fully charge the battery.

(2)If there is a USB charging cable included (optional), you

can charge the headset with the USB charging cable. Please

plug one end of USB charging cable to USB slot of your Fig.6

computer, another end to DC input of the headset. The following

is the same with the travel charger.

(Please refer to Fig.6.)

3.Turning the headset on or off:

(1)Press the “Button 1” for nearly 3 seconds.

You will hear two beep sounds and the blue

indicator will begin to flash. The headset is now

powered on.

(2)When the power is on, press the “Button 1”

for 3 seconds. You will hear two beep sounds

and the red indicator will flash. Now the

headset is turned off. (Please refer to Fig.7 and

Fig.8.) Fig.7 Fig.8

4.Pairing the headset:

(1)The headset must be powered off before you begin to initiate the pairing. Press

the “Button 1” till the blue and red indicators begin to flash alternatively. The

headset is now in pairing mode.

(2)Initiate the pairing process of your bluetooth mobile phone.

(Please refer to the manual of your mobile phone.)

(3)When asked the PIN code, please enter “0000” to

successfully complete the pairing process.

(4)When the pairing process is successfully completed, the blue

indicator will flash. The headset is now in standby mode.

(5)After the headset is successfully paired with your mobile

phone. In some case, you will still have to connect the headset

with your mobile phone. (Please refer to the mobile phone

manual.) (Please refer to Fig.9.) Fig.9

Note:

(1)If the headset is not in pairing mode, your mobile phone can not find the headset.

Please set the headset into pairing mode before you start to pair the headset with

your phone.

(2)If no pairing is possible over a period of time (Aprox. 1 minute), the pairing

process will be stopped. You have to repeat STEP 4 to successfully complete the

pairing.

5.Answering or ending calls:

When the headset is paired with your phone, and when there is an incoming call, you

will hear a musical ring. Then press the “Button 1” to answer the call. When there is

a call in session, you can press the “ Button 1 ” to end the call.

Note:

Because of the different design of some mobile phones, a

disconnection may automatically happen even when the

headset is powered on. In this case, the headset will not ring if

there is an incoming call. Press “Button 1” for 1 second to

re-connect the headset with the mobile phone for an incoming

call.(Please refer to Fig.10.)

Fig.10

6.Making calls:

(1) Voice-dialing:

Press the “Button 1”. After hearing a beep sound, say the name of the person you

recorded on your phone. (The availability of this function depends on the design of

the mobile phone you use. Please refer to the manual of your mobile phone for the

voice-dialing function. )

(2)Dial the phone number on you mobile phone as you normally do. The sound will

be transmitted to the headset automatically.

7.Changing the volume of the Headset:

(1) Press the “Button 2” to increase the listening volume of the headset.

(2) Press the “Button 3 ” to decrease the listening volume of the headset.

(3) You can also adjust the volume from your mobile phone. Please refer to the

manual of your mobile phone.

8.Redialing the call:

After ending the call, you can press the “Button 2” to redial the call you just ended.

Produkt Specifikationer

Mærke:	Energy Sistem
Kategori:	Hovedtelefoner
Model:	Linnker 5000

Har du brug for hjælp?

Hvis du har brug for hjælp til Energy Sistem Linnker 5000 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hovedtelefoner Energy Sistem Manualer

Energy Sistem Headphones Bluetooth Style 3 Manual

10 September 2024

Energy Sistem Headphones BT Urban 3 Manual

5 September 2024

Energy Sistem Freestyle Manual

29 August 2024

Energy Sistem Sport 1+ Dark Manual

29 August 2024

Energy Sistem Headset Office 3 Manual

10 August 2024

Energy Sistem Office 2 Manual

6 August 2024

Energy Sistem Office 2+ Manual

5 August 2024

Energy Sistem Headphones BT Urban 2 Manual

5 August 2024

Energy Sistem DJ2 Manual

27 Juli 2024

Energy Sistem Linnker 5000 Manual

22 Juli 2024

Hovedtelefoner Manualer

Nyeste Hovedtelefoner Manualer

Trust Nouna 25277 Manual

3 April 2025

PowerLocus P2 Manual

3 April 2025

Sennheiser RS 120-W Manual

1 April 2025

Celly PC2USBCEARPIN Manual

1 April 2025

Celly Ultrasound Manual

1 April 2025

1 April 2025

1 April 2025

1 April 2025

1 April 2025

1 April 2025