EX-46022 English EX-46022 English
5 6 1
9-Pin D-Sub Seriell Stecker
44 pin D-Sub serial female connector
BESCHREIBUNG & TECHNISCHE DATEN
Die EX-46022 ist eine seriell RS-232 PCIe Karte. Sie ist mit zwei seriellen FIFO 16C550
Anschlüsse für den Anschluss von High-Speed seriellen RS-232 Peripherie Geräten (z.B.
Modems, Plotter, Drucker, Scanner, Registrierkassen usw.) ausgestattet. Diese werden mittels
eines Octopus Kabels zur Verfügung gestellt, welches an die 44-Pin Buchse der EX-46022
angeschlossen wird. Die EX-46022 unterstützt alle PCI-Express Slots von x1 bis x16. Der serielle
PCI-Express Bus unterstützt optimal die Leistung des schnellen EXAR Chipsatz. Die Karte
gewährleistet so eine sichere Datenübertragung und exzellente Performance von bis zu
115KBaud/s für jedes angeschlossene serielle Gerät! Benutzer müssen keine Jumper manuell
setzen, um I/O-Adressen und IRQ-Speicherorte zu konfigurieren. Darüber hinaus unterstützt
diese Karte eine Stromversorgung von 5 VDC oder 12 VDC von jedem seriellen Port über einen
1/4/8/9-Pin-Ausgang. Dies ist praktisch für Benutzer, die serielle Geräte ohne zusätzliche externe
Stromversorgung anschließen möchten. Diese Karte bietet eine zuverlässige und leistungsstarke
Lösung für die serielle Multi-Port-Kommunikation.
Kompatibilität: PCI-Express p1-x1 bis x16
Betriebssysteme: Windows XP / Vista / 7 / 8.x / 10 / 11 / Server 20xx
Linux 2.6.31 oder höher
Anschlüsse: 2x 9-Pin D-Sub Seriell Stecker, 4 Pin Molex Stromanschluss
Lieferumfang: EX-46022, Octopus Kabel, Low Profile Bügel, Anleitung
9-Pin D-Sub Seriell Stecker:
2x 9 Pin D-Sub Seriell Stecker
44-pin socket: Pin assignment on the circuit boards site
Please note the following installation instructions. Since there are significant differences
between PCs, p1-we can only provide general instructions for installing the EX-46022. If you have
any questions, please refer to the operating instructions for your computer system.
1. Turn off your computer and all connected peripheral devices and unplug the power cord
from all devices.
2. Loosen the screws on the back of your computer case and carefully remove the case.
3. Now find a free PCIe slot and carefully insert the EX-46022 into the selected PCIe slot.
Make sure that the EX-46022 is inserted correctly and that there is no short circuit. Set
the jumpers according to your requirements. Caution: Before inserting this card into
your system, please carefully check the voltage jumper settings and the hardware
installation steps to avoid damage. Incorrect operation can cause damage to the
connected serial device.
4. Then attach the EX-46022 to the housing with a screw.
5. Now close the computer case again with the screws.
6. Finally, connect the octopus cable included in the scope of delivery to the 44-pin socket
of the EX-46022.
Windows XP / 7 / 8 / 10 / 11 / Server 20xx
After completing the hardware installation, the operating system automatically recognizes the
EX-46022 and displays a new “Serial PCI port.”. First, please download the driver on the
website. www.exsys.de or www.exsys.ch. The driver is available for your product under
“Downloads”. Now open the “XR17V35x_RS-232” folder. Select the folder for your operating
system, which is located in the respective folder (see illustration). Follow the installation
instructions and complete the installation. Important! Restart your PC after installation.
Linux
After completing the hardware installation, the operating system automatically recognizes the
EX-46022 and displays a new “Serial PCI port.”. First, please download the driver on the
website. www.exsys.de or www.exsys.ch. The driver is available for your product under
“Downloads”.
Unzip the compressed driver source file into a specific directory using the following command:
# unzip xr17v25x_35x-Inx3.x.x-pak.zip7. The driver source files should now be unzipped in the
current directory..
Run the following command to compile the driver: # make8.
If the compilation was successful, the file xr17v35x.ko will be located in the current directory.
Then execute the following command to activate the module drivers: #insmod xr17v35x.ko
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
Switzerland:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Italy:
EXSYS Italia Srl
Via Belvedere, 45/B
I-22100 Como
www.exsys.it
