Extron SMK VRE 48 Manual

Extron højttalerstøtte SMK VRE 48

Læs gratis den danske manual til Extron SMK VRE 48 (2 sider) i kategorien højttalerstøtte. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Extron SMK VRE 48, eller vil du spørge andre brugere om produktet?

Side 1/2

SMK VRE 48 Setup Guide

The Extron SMK VRE 48 V-Rail Extension Kit allows the V-rails that ship with the SF Series

speakers to span 4' (1.2 m) tile grids. The extension bars use the same interlocks as the

modular V-rails that ship with the SoundField

® XD speakers, allowing the pieces to snap

together (see the speaker user manual for further details).

The V-rail extension bar is connected between the two V-rail half sections that come with the

speakers (see the steps below).

1. Assemble the V-rail to the extension bar by tting the tab on the V-rail end into the

slot on the extension end .1

2. Open the extension bar

until it locks together

with the V-rail . 2

3. Assemble the other V-rail

end to the extension bar

end by tting the slot on

the V-rail end onto the tab

on the extension end .3

4. Rotate the V-rail end

until it locks together

with the extension bar . 4

1

23

4

Extension

Extension

V

-Rail

ends

Top View

Side View

V-Rail

ends

68-3377-50 Rev. B

04 19

© 2019 Extron Electronics. All rights reserved. www.extron.com

See the on the Extron websiteExtron Safety and Regulatory Compliance Guide .

5. Insert the two included screws through each end of the extension bar in step 4.

6. Repeat steps 1 through 5 for the

other V-rail extension bar.

7. Position the C-ring assembly on the

assemblies so that the C-ring is cen

over the hole in the tile.

8. Secure the C-ring to the V-rail

assemblies using two screws

that came with the speakers.

9. Refer to the speaker setup

guide for complete

installation details. V-rail

C-ring

Screws

1 2 3 4

1 2 3 4

Overlapping

area

Tighten with screw

at 1st hole.

Overlapping area

Tighten with scr

ew

at 4th hole.

Produkt Specifikationer

Mærke:	Extron
Kategori:	højttalerstøtte
Model:	SMK VRE 48

Har du brug for hjælp?

Hvis du har brug for hjælp til Extron SMK VRE 48 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

højttalerstøtte Extron Manualer

Extron SMK VRE 48 Manual

6 September 2024

højttalerstøtte Manualer

Nyeste højttalerstøtte Manualer

Sonorous SP 600 Manual

27 Februar 2025

Axis TC1601 Manual

20 Februar 2025

SoundTube SM1290 Manual

20 Februar 2025

Nubert BS-652 Manual

5 Februar 2025

NeoMounts NS-SHELF100 Manual

14 Januar 2025

Sonos Arc Ultra Wall Mount Manual

14 Januar 2025

Omnitronic STS-1 Manual

31 December 2025

Omnitronic EUMO-2 Manual

31 December 2025

Konig & Meyer 24496 Manual

30 December 2025

Bowers Wilkins FS-700 S3 Manual

30 December 2025