Fender '63 Vibroverb Manual

Fender Guitarforstærker '63 Vibroverb

Læs gratis den danske manual til Fender '63 Vibroverb (7 sider) i kategorien Guitarforstærker. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Fender '63 Vibroverb, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

T H E S O U N T H A T C R E A T E S L E G E N D SD

P/N 037307

Owner,s Manual

‘63 Vibroverb

Your “new” ‘63 VIBROVERB ampliﬁer is living proof of the

quality and longevity of Fender ampliﬁer designs.

Fender ﬁrst introduced the VIBROVERB in the early part of

1963. Unlike many of the other Fender ampliﬁers that

were produced for years, this version of the VIBROVERB

had a production life of less than 4 months. It is estimated

that fewer than 600 VIBROVERB units were ever produced.

This limited production is one of the reasons this ampliﬁer

has become highly sought after by vintage amp collectors.

The VIBROVERB was the ﬁrst Fender production model to

have both reverb and vibrato as built-in “eﬀects”.

The original VIBROVERB shows Fender in a transitional

period with ampliﬁers changing from tweed covering to

brown “Tolex” and eventually to black “Tolex.” In the sum-

mer and fall of 1963, Fender changed the speaker conﬁgu-

ration of the VIBROVERB to a 15 inch speaker and the

brown “Tolex” covering changed to black. The single 15

inch model is also fairly rare, but the 2-10 version is leg-

endary.

Fender’s ‘63 VIBROVERB re-issue ampliﬁer is based on the

original cosmetics, sound and circuit. Every eﬀort was

made to be true to the original.

Several changes have been made for safety and reliability

reasons. A printed circuit board is used rather that the

phenolic “parts panel” of the sixties. A 3-prong line cord is

required for safety reasons. Minor modiﬁcations to the cir-

cuit took place since certain parts are no longer available,

but every eﬀort was made to keep the original circuit values

and sound the same. We resisted the temptation to

“improve” the amp with features found on later models like

master volume, eﬀects loop or channel switching. In order

to improve reliability, a solid state rectiﬁer was used rather

than a 5AR4 tube. Since the ‘63 VIBROVERB uses a solid

state rectiﬁer, there is one less tube and tube socket than an

original VIBROVERB. All internal circuit voltage values

have been precisely matched to the new solid state rectiﬁer

to insure exact sonic reproduction and no alterations to the

“vintage” sound. On the original model, the Reverb /

Vibrato Footswitch connected to the unit via 2 RCA style

jacks; this has been changed to a more reliable 1/4” jack.

The reverb pan cables now connect more securely to the

chassis also.

The VIBROVERB is unique in Fender ampliﬁer history by the

implementation of its tone circuit. The VIBROVERB was the

ﬁrst and ONLY Fender ampliﬁer to use this type of tone cir-

cuit. The treble control is “tapped,” meaning it responds

more like an active tone control allowing boost AND cut of

high frequencies. Conventional Fender tone circuits pro-

vide a small amount of tone shaping even in the “0” posi-

tion, but if the VIBROVERB Treble Control is set to about

“5”, the response is ﬂat.

The speakers used in the ‘63 VIBROVERB are reproductions

of the original speakers made by the Oxford Speaker

Company. When Fender started work on this project,

Fender contacted Oxford who still had much of the original

tooling and documentation of this 10 inch speaker from the

early sixties.

The power and output transformers used in the ‘63

VIBROVERB are built to the original speciﬁcations, which

are still in the R&D engineering ﬁles at Fender’s oﬃce. The

same “direct-coupled” oscillator circuit is used for generat-

ing the vibrato. The reverb sound from the VIBROVERB is

“warmer” than later Fender amps due to the unique reverb

send and recovery circuit.

The cosmetics of the ‘63 VIBROVERB incorporate the brown

“Tolex” and “Ecru” grill cloth used in 1963. We have re-

tooled the “ﬂat” Fender logo and have added the original

tilt-back legs found on so many Fender amps through the

sixties and seventies.

It is suggested that you read this manual thoroughly to

understand all the features and functions of your new

ampliﬁer. The purchase of a Fender ampliﬁer will provide

years of musical enjoyment and the ‘63 VIBROVERB helps

keep the Fender legend going strong.

WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK

HAZARD, DO NOT EXPOSE AMPLIFIER TO RAIN OR

MOISTURE!

INTRODUCTION

Produkt Specifikationer

Mærke:	Fender
Kategori:	Guitarforstærker
Model:	'63 Vibroverb

Har du brug for hjælp?

Hvis du har brug for hjælp til Fender '63 Vibroverb stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Guitarforstærker Fender Manualer

Fender Tone Master Manual

9 August 2024

Fender '68 Custom Vibro Champ Manual

8 Juli 2024

Fender Tone Master Twin Reverb Blonde Manual

8 Juli 2024

Fender Tone Master Twin Reverb Manual

8 Juli 2024

Fender Bassbreaker BB 112 Manual

8 Juli 2024

Fender Mustang GTX50 Manual

8 Juli 2024

Fender Mustang LT40S Manual

8 Juli 2024

Fender ’68 Custom Twin Reverb Manual

8 Juli 2024

Fender '68 Custom Pro Reverb Manual

8 Juli 2024

Fender Mustang LT50 Manual

8 Juli 2024

Guitarforstærker Manualer

Nyeste Guitarforstærker Manualer

Radial Engineering Reamp JCR Manual

25 Januar 2025

Hughes & Kettner TriAmp Mark 3 Manual

31 December 2025

Hughes & Kettner AmpMan Manual

31 December 2025

Hughes & Kettner GrandMeister Deluxe 40 Manual

31 December 2025

Hughes & Kettner TriAmp MKIII Manual

31 December 2025

Hughes & Kettner ERA 1 Manual

31 December 2025

Hughes & Kettner ERA 2 Manual

31 December 2025

NUX AC-25 Manual

9 December 2024

L.R.Baggs Stadium Manual

3 December 2024

Radial Engineering SGI Manual

3 December 2024