Fender Rumble 800 Combo Manual

Fender Guitarforstærker Rumble 800 Combo

Læs gratis den danske manual til Fender Rumble 800 Combo (19 sider) i kategorien Guitarforstærker. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Fender Rumble 800 Combo, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/19
NOTES: UNLESS OTHERWISE SPECIFIED.
PRINT IN BLACK OR GRAYSCALE ONLY
1.
USE 80LB UNCOATED COVER STOCK FOR THE FRONT
2.
AND REAR COVER PAGES
USE 20LB TEXT STOCK FOR INTERIOR PAGES
3.
NO BLEED PRINTING REQUIRED
4.
PAGE SIZE: 8 1/2 INCHES X 11 INCHES
5.
STAPLE BOUND
6.
SAMPLES OF FIRST PARTS MUST BE APPROVED BY
7.
FENDER R&D BEFORE STARTING PRODUCTION.QTY 3
UNLESS OTHERWISE SPECIFIED.
DO NOT PRINT
THIS PAGE
REVISIONS
REV.
DESCRIPTION
BY
DATE
A
PART NUMBER
SIZE
PRODUCT MANAGER
TITLE
REV
DATE
PROJECT ENGINEER
FENDER MUSICAL INSTRUMENTS CORP.
RESEARCH & DEVELOPMENT
CORONA, CALIFORNIA U.S.A.
THIS DOCUMENT CONTAINS INFORMATION OF PROPRIETARY NATURE TO FENDER
MUSICAL INSTRUMENTS AND IS SUBMITTED TO YOU IN CONFIDENCE AND SHALL NOT
BE DISCLOSED OR TRANSMITTED TO OTHERS WITHOUT AUTHORIZATION FROM
FENDER MUSICAL INSTRUMENTS
ANY PART SUPPLIED FOR USE
IN ANY FENDER PRODUCT
MUST CONFORM TO THE
EUROPEAN RoHS DIRECTIVE.
COPYRIGHT - /2 /20 - 4 7 21
FENDER MUSICAL
INSTRUMENTS CORP.
TITLEBLOCK REVISION 2 1
DATE
PROJECT MANAGER DATE
A
MANUAL OWNER’S RUMBLE 800 COMBO
AJ.O.
PR 6106
7724487000
9. .2130
06-OCT-2021
10/06/2021
2
Connect a footswitch to amplier to remotely engage OVERDRIVE
(E). Three Fender footswitches will work (shown at right with part
numbers; Economy footswitch model is included with Rumble 800
combo), or any generic single-button latching-type footswitch will
work. Contact a local Fender dealer to purchase a Fender footswitch
of choice.
During footswitch use, front-panel OVERDRIVE switch remains
functional. Note that normal front-panel switch position (in=ON,
out=OFF) can become reversed depending on footswitch status.
Overdrive LED status on front panel will be correct, but always
indicator light on an LED footswitch (such as model 0994052000
at right) may display incorrectly (i.e., LED is o when OVERDRIVE is
on) depending on front-panel switch status. When using an LED
footswitch, keep front-panel OVERDRIVE switch in OUT position to
ensure correct display status on footswitch LED.
ECONOMY FOOTSWITCH (Included, PN 0994049000):
Basic black single-button on/o footswitch.
VINTAGE FOOTSWITCH (Optional, PN 0994054000):
Chrome single-button on/o footswitch.
LED FOOTSWITCH (Optional, PN 0994052000):
Contemporary single-button on/o footswitch with LED
indicator. NOTE: For correct operation of footswitch LED,
overdrive eect must be switched o before connecting
this footswitch.
FOOTSWIT
FOOTSWIT
FOOTSWIT
FOOTSWITCHES
CHES
CHES
CHES
FOOTSWITCHES
ENGLISH
K. POWER SWITCH: Turns amplier on and o. When quickly turning
the power oand then on again, a brief delay can occur for 20-30
seconds.
L. IEC POWER INLET: Connect included power cord to a
grounded A/C electrical outlet in accordance with voltage and
frequency ratings specied on rear panel of amplier.
M. EXTERNAL SPEAKER OUTPUT/IMPEDANCE SWITCH
: Connect
an external speaker cabinet (8Ω or 4Ω minimum impedance)
to this combination output using a Speakon® or 1/4” cable.
Set switch to match impedance rating of external cabinet;
continuous power rating of external cabinet must meet or
exceed power rating listed for chosen switch setting. Set switch
to 8Ω when no external cabinet is connected.
The Rumble 800 Combo’s high-power class “D” amplier
operates in bridge mode, meaning that voltage is present
in both terminals (+) and (-). Use caution when connecting
a speaker cable to the External Speaker output on the rear
panel—never let the tip (+) or sleeve (-) of a speaker cable (see
illustration below) contact the amp’s metal chassis or any other
earth-grounded electrical equipment (i.e., audio mixers and
other sound reinforcement devices). A speaker cable plugged
into the amp’s External Speaker output should be connected
only to another speaker cabinet.
N. HORN SWITCH: Activates high-frequency driver.
O. EFFECTS LOOP: Connect SEND to external eect input; connect
external eect output to RETURN. Eects loop use reduces
amount of noise and tone degradation caused by eects pedals.
For multi-amp conguration, connect primary amp SEND to
secondary amp RETURN. Instrument is connected to primary
amp; preamp controls will adjust tone for both units (secondary
unit preamp controls are bypassed). Use MASTER volume on
both amps to independently control loudness of each.
P. AUX IN: Connect external audio player here. Adjust aux
signal volume/tone at its source; amp MASTER volume (H)
doesn’t aect external device volume. Earth-grounded audio
equipment such as a laptop with a connected power supply
may result in unwanted noise/hum.
Q. HEADPHONES: Stereo headphone output (16Ω minimum
impedance) automatically mutes speaker output.
R. FOOTSWITCH: Allows remote switching of OVERDRIVE section.
See “Footswitches” section below.
S. LINE OUT/GROUND LIFT: Balanced output for connection to
external devices such as sound reinforcement and recording
equipment. Pressing GND LIFT button can help eliminate noise
caused by connection to improperly grounded equipment.
Select PRE for direct unaected signal; select POST for fully
processed signal (except MASTER). Speaker cabinet connection
not required for silent recording applications.
Insulation
( + )
( - )
REAR PANEL

Produkt Specifikationer

Mærke: Fender
Kategori: Guitarforstærker
Model: Rumble 800 Combo

Har du brug for hjælp?

Hvis du har brug for hjælp til Fender Rumble 800 Combo stil et spørgsmål nedenfor, og andre brugere vil svare dig


Guitarforstærker Fender Manualer

Fender

Fender Tone Master Manual

9 August 2024
Fender

Fender '68 Custom Vibro Champ Manual

8 Juli 2024
Fender

Fender Tone Master Twin Reverb Blonde Manual

8 Juli 2024
Fender

Fender Tone Master Twin Reverb Manual

8 Juli 2024
Fender

Fender Bassbreaker BB 112 Manual

8 Juli 2024
Fender

Fender Mustang GTX50 Manual

8 Juli 2024
Fender

Fender Mustang LT40S Manual

8 Juli 2024
Fender

Fender ’68 Custom Twin Reverb Manual

8 Juli 2024
Fender

Fender '68 Custom Pro Reverb Manual

8 Juli 2024
Fender

Fender Mustang LT50 Manual

8 Juli 2024

Guitarforstærker Manualer

Nyeste Guitarforstærker Manualer

Chord

Chord PT-12 Manual

14 August 2025
VOX

VOX VT100X Manual

10 August 2025
VOX

VOX VX15 GT Manual

9 August 2025
VOX

VOX MV50 High Gain Manual

8 August 2025
VOX

VOX MINI GO 50 Manual

8 August 2025
VOX

VOX MV50 Clean Manual

8 August 2025
VOX

VOX BC108 Manual

8 August 2025
VOX

VOX MVX150C1 Manual

8 August 2025
VOX

VOX MINI GO 3 Manual

8 August 2025
VOX

VOX VX50 AG Manual

8 August 2025