Fibaro RGB Module Manual

Fibaro Smart hjem RGB Module

Læs gratis den danske manual til Fibaro RGB Module (1 sider) i kategorien Smart hjem. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Fibaro RGB Module, eller vil du spørge andre brugere om produktet?

Side 1/1
RGBW Controller FGRGBWM-441
Product Overview:
A universal, Z-Wave compatible RGB/RGBW controller. The Fibaro RGBW Controller can control
LED strips, RGB/RGBW LEDs and 12V-24V powered light sources. In addition, the device
supports up to four 0V-10V analog sensors including temperature sensors, humidity sensors,
wind sensors, air quality sensors and light sensors. All IN and OUT terminals may be user
configured for LED control or 0V-10V signal readouts. May also be used as a dimmer with Halogen
lamps.
Product Highlights
• Current and historical power consumption measurements.
• Controlled through other Fibaro devices or any Z-Wave controller.
• Microprocessor controlled.
• Most advanced device of its type in the world.
Technical Data:
• Power source: 12V DC/24V DC.
• Rated output power: combined 12A (sum of all connected outputs).
• Max load (e.g. Halogen lamps):
at 12W-144W combined.
at 24V-288W combined.
• Conforms to UE regulations and FCC regulations
• Power consumption: Less than 0.3 W.
• Radio frequency: 868.4 MHz EU; 908.4 MHz US; 921.4 MHz ANZ; 869.2 MHz RU.
Antenna range: up to ca. 165 ft outdoor, or up to 100 ft inside
(depends on building structure).
• External dimensions (L x W x H) 1.65in x 1.42in x 0.59in.


Produkt Specifikationer

Mærke: Fibaro
Kategori: Smart hjem
Model: RGB Module

Har du brug for hjælp?

Hvis du har brug for hjælp til Fibaro RGB Module stil et spørgsmål nedenfor, og andre brugere vil svare dig