Fluval C3 Manual

Fluval Vandfilter C3

Læs gratis den danske manual til Fluval C3 (24 sider) i kategorien Vandfilter. Denne vejledning er vurderet som hjælpsom af 73 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 37 anmeldelser. Har du et spørgsmål om Fluval C3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

1PACKING LIST

PREPARING FILTER INSERTS. All ﬁlters must be rinsed thoroughly.

C Power Filter

Instruction Manual

Quick Start Guide

Congratulations on the purchase of your new Fluval C Power Filter. Please allow

approximately 15-20 minutes for the complete installation of ﬁlter parts and

inserts. Inspect the ﬁlter for any visible signs of shipping damage, and verify

that the motor is securely fastened to the ﬁlter case. The following parts should

be included in your package.

FLUVAL POLY/FOAM PAD

Slide the mechanical frame out of the ﬁlter body and rinse under tap water to remove

any debris caused during shipment. Check to make sure the Poly/Foam pad is inserted

correctly, with the dense polyester side facing the grid on the frame.

FLUVAL BIO-SCREEN

Rinse Bio-Screen under tap water, and place into Trickle Chamber cover.

Note: The side with the large holes must face upwards.

FLUVAL C-NODES

Open poly bag and spread them evenly in the Trickle Chamber, then rinse under tap water.

(Aquarium water is preferable if the aquarium is already established). Replace Trickle

Chamber cover. Ensure C-Nodes are well positioned inside the chamber so that the Note:

cover closes perfectly.

FILTER INSERTS MAINTENANCE

NOTE: Regular replacement of Fluval ﬁlter inserts is essential to ensure optimum ﬁlter performance.

The Fluval Poly/Foam Pad, Activated Carbon, Bio Screen and C-Nodes should be changed alternately in order to maintain continuous biological activity. To enhance bacterial action, pour a dose

of Nutraﬁn Cycle Biological Aquarium Supplement onto your ﬁlter inserts each time you change the media. Follow individual packaging instructions for recommended replacement intervals.

FLUVAL ACTIVATED CARBON

Remove Activated Carbon insert from its plastic shipping bag, and rinse pouch under tap

water to remove any dust particles. Place pouch loosely into the chemical media basket.

(Do not remove carbon from porous bag).

Biological Trickle chamber

with cover

Filter Cover

Mechanical Frame

“U” Tube Telescopic Intake Tube

C-Nodes

Activated Carbon

Impeller Cover Assembly