
EN
- 2 -
DESCRIPTION
- Compact DJ mixer with 3 stereo channels and 1 microphone, with PC audio card and Bluetooth/USB
player.
- Connect the mixer to your PC as a plug-and-play audio card on Windows and Mac, no drivers required.
You can play audio content from your PC and record audio on your PC simultaneously.
- Built-in Bluetooth receiver, plays music received from smartphones, tablets and other Bluetooth devices.
- USB player and recorder, play music or record the event without the need of a PC.
CONTROLS
FRONT PANEL
DJ MIXER MIX-3DJ
CUE
SELECT
MAIN MIX
MIC
CH 1
CH 2
CH 3
MIC VOL
TALK OVER
OFF
ON
PHONO
CH 1 CH 2 CH 3
CH 1
LINE PHONO LINE PLAYER LINE
R
-15
L
CUE
VOL
MODE
VOL
+
VOL
-
•REC
PLAYER
-10 -5 0 3
CH 2
RCUE L R L R L R L MIC
MAIN MIX
OUTPUTS INPUTS
CH3
LINE
CH2
PHONO/LINE
CH1
PHONO/LINE
DJ MIXER
MIX-3DJ
12 V DC, 1A
1 2
14
8910111213
3 4 5 6
7
1.- CUE SELECT: monitoring channel selector CUE . Allows you to select an input channel to listen to
(pre-fader) of the MAIN MIX output.
2.- Volume sliders of input channels CH 1, CH 2 and CH 3 respectively.
3.- PHONO/LINE (CH 1/CH 2): input type selectors connected on the rear panel to adjust the input
sensitivity between PHONO level and line LEVEL.
4.- PLAYER/LINE (CH 3): input selector for channel 3: PLAYER for player and PC/Mac; and LINE for the
CH 3 line input on the rear panel.
5.- Mixer operation LED indicator.
6.- POWER: On/off mixer switch. When the mixer is switched on, the LED indicator is permanently lit.
7.- Left (L) and right (R) channel indicator lights for the MAIN MIX output level. An adequate signal level will
cause the green and yellow LED indicators to light in a timely fashion. If the yellow indicators light up for
too long, you should reduce the output signal level. The red LED indicators should not light up, if this
happens you should reduce the output signal level to prevent damage to the devices.
8.- USB port for audio file playback.
9.- Player information display.