FSP Hydro K Pro 850W ATX 2.52 Manual

FSP Computer strømforsyning Hydro K Pro 850W ATX 2.52

Læs gratis den danske manual til FSP Hydro K Pro 850W ATX 2.52 (48 sider) i kategorien Computer strømforsyning. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om FSP Hydro K Pro 850W ATX 2.52, eller vil du spørge andre brugere om produktet?

Side 1/48
manual
Power Supply
Installation
1
At first, remove the old PSU from the system case. Firstly, draw off all
plugs from the PSU, that are connected with the mainboard or other
components in the PC. Now remove the screws at the back side of the
case which connects the PSU with the case. After the screws are
removed, remove the old PSU from the case carefully and replace it with
your new FSP PSU.
Set the PSU into the intended position in the housing and tighten it with
the supplied screws. If you purchased a PSU with modular cables, put all
necessary cables on the PSU. No need to connect cables that are not
intended to be used on the PSU.
Put the 20+4 / 24-pin ATX plug through
the housing to the correct connection
of the mainboard.
1


Produkt Specifikationer

Mærke: FSP
Kategori: Computer strømforsyning
Model: Hydro K Pro 850W ATX 2.52

Har du brug for hjælp?

Hvis du har brug for hjælp til FSP Hydro K Pro 850W ATX 2.52 stil et spørgsmål nedenfor, og andre brugere vil svare dig