Furman D10-PFP Manual

Furman stikdase D10-PFP

Læs gratis den danske manual til Furman D10-PFP (1 sider) i kategorien stikdase. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Furman D10-PFP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

D10-PFP INSTRUCTIONS

INS02805 REV A 02/08

The D10-PFP is a sturdy, rack-mountable power distributor featuring ten circuit breaker protected rear

panel outlets. Install a D10-PFP in your rig or component rack to safely power all of your equipment.

Note that the D10-PFP is a power distributor only, and offers no conditioning or surge protection

functions, making it an ideal extension to an existing branch circuit.

MAXIMUM LOAD:

The ten circuit breaker protected outlets are rated at 15 Amps, which is equivalent to 1800 Watts at 120

Volts. If the total load on the D10-PFP (combining all outlets) exceeds 15 Amps, the circuit breaker

(located on the front panel) will trip, cutting off power to all connected equipment. Should this happen,

reduce the load by unplugging one or more units from the D10-PFP, then push the circuit breaker

button in to reset it.

CAUTION:

Only for use with 15 Amp circuits utilizing a minimum of 14 AWG.

15 AMP

POWER ON

D10-PFP POWER DISTRIBUTOR

Produkt Specifikationer

Mærke:	Furman
Kategori:	stikdase
Model:	D10-PFP
Vægt:	2300 g
Produktfarve:	Sort
Husmateriale:	Stål
Kabellængde:	1.8 m
Maksimal ydeevne:	1800 W
Nominel udgangsspænding:	120 V
Nominel indgangsspænding:	90-140 V
AC udgange, antal:	10 AC stikkontakt(er)
Rackkapacitet:	1U
Strøm (maks.):	15 A