Fusion EN-AT1100 Manual

Fusion Bil højtalere EN-AT1100

Læs gratis den danske manual til Fusion EN-AT1100 (2 sider) i kategorien Bil højtalere. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Fusion EN-AT1100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ENCOUNTER

ACTIVE ENCLOSURES

EN-AT1100, EN-AT1120

Disclaimer

The provided self adhesive feet are intended for initial site placement only, and are not to be considered a suitable method

of securing the Active Enclosure. Always ensure the Active Enclosure is securely attached, to avoid movement.

FUSION accepts no responsibility for damage or injury in relation to inappropriate securing of this product

Product Specifications

Control Descriptions

LEVEL

This allows the adjustment of the amplifier level of the subwoofer. Turn clockwise to increase the level. If the sound becomes

distorted reduce the level.

LOW PASS FILTER (LPF)

This allows the adjustment of the highest frequency the Encounter Active Enclosure Tube will produce. This should be adjusted to

blend with your main speakers. Typically, this will be set to around 100Hz (approximately the central position of the control knob).

BASS

This allows very low frequencies to be boosted. Adjust with care and listen for distortion. If the sound becomes distorted, reduce

the amount of boost.

REMOTE LEVEL CONTROLLER

When connected, this allows further control over the level from a remote location, using the supplied lead.

Installation

Make sure the Encounter Active Enclosure is firmly fixed in your vehicle. Check before drilling or cutting holes. DO NOT work near

gas tanks, fuel lines, hydraulic lines or electrical wiring.

DO NOT mount the Encounter Active Enclosure in such a way as to pinch or damage the wires.

Make sure everything is firmly connected, before attaching the +12V wire. Make sure the +12V wire is fused as close as possible

to the battery. ALWAYS use a fuse with the recommended rating.

Two types of self-adhesive feet are included in the packaging. The rubber feet are to protect the bottom of the enclosure, or the

surface it is mounted to. There are four feet, which correspond to four indentations (feet and indentations are the same shape) in

the bottom of the enclosure end plates. Peel off the paper covering the rubber feet, and adhere to the indentations.

There are also four Velcro feet (both hook and eye parts, both with self-adhesive properties) included. These are for assisting

in fixing the location of the enclosure. Peel off the paper covering and adhere one part to the indentations in the enclosure end

plates, and the matching part to the mounting surface. Always clean the surfaces before applying the adhesive part

EN-AT1100 EN-AT1120

Max Power Rating 300 Watts 360 Watts

Frequency Repsonse 35Hz - 250Hz 30Hz - 250Hz

Bass Boost (Variable) 0 / + 18dB 0 / + 18dB

Low Pass Filter (Variable)

40Hz - 250Hz 40Hz - 250Hz

Tuning Bass Reflex Bass Reflex

Woofer Size 10” 12”

Fuse 15 Amp 15 Amp

Tube Dimensions 550mm x 306mm x 306mm

21 11/16” x 12 1/16” x 12 1/16”

590mm x 365mm x 365mm

23 1/4” x 14 3/8” x 14 3/8”

Produkt Specifikationer

Mærke:	Fusion
Kategori:	Bil højtalere
Model:	EN-AT1100

Har du brug for hjælp?

Hvis du har brug for hjælp til Fusion EN-AT1100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bil højtalere Fusion Manualer

Fusion EN-AT1100 Manual

11 August 2024

Fusion EN-AB1120 Manual

9 August 2024

Bil højtalere Manualer

Nyeste Bil højtalere Manualer

Exibel CX1040 Manual

14 Oktober 2024

Rockford Fosgate T152 Manual

13 Oktober 2024

9 Oktober 2024

7 Oktober 2024

22 August 2024

22 August 2024

22 August 2024

21 August 2024

Radical Audio RA163.3 Manual

19 August 2024

Axton AB30 Manual

13 August 2024