Gamber-Johnson 7160-0880 Manual

Gamber-Johnson Vugge/dockingstation 7160-0880

Læs gratis den danske manual til Gamber-Johnson 7160-0880 (5 sider) i kategorien Vugge/dockingstation. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Gamber-Johnson 7160-0880, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

Rev.A

INST-777

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

1/5

INSTALLATION INSTRUCTIONS

Product

Revision

Form

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Printing Spec:

PS-001

GETAC- RX10H MEDICAL DOCK

7160-0880

This instruction sheet is for the RX10H docking station only. For instructions on

features, set-up, and operation of the RX10 computer, please refer to the manual

provided by Getac with the computer.

This docking station is designed to be used with a variety of Gamber-Johnson

mounting systems. Installation instructions for other Gamber-Johnson products

are provided with each individual product.

This instruction sheet is for the following products:

For Vehicle Mounting Applications (M4 X 0.7 Mounting Hardware):

Item No. 7160-0880-00 DOCK - GETAC - RX10H -No RF

Item No. 7160-0880-03 DOCK - GETAC - RX10H -Tri-RF

Conduct a "Bench Test"

Gamber-Johnson strongly advises a "bench test" be conducted to verify all

electronic and software issues are resolved prior to installation:

Make sure the computer is operational by itself.

Insert computer into the docking station and verify that the computer is

operating in the dock.

Interconnect entire assembly and verify start-up of all components,

including other equipment (printers, modems, scanners, etc.)

Gamber-Johnson recommends positioning of all mounts and equipment in the

vehicle prior to the actual install to verify that mounting locations are safe and

practical.

PRE-INSTALLATION RECOMMENDATOINS

During Installation:

DO NOT

connect this docking station to the vehicle battery until:

All other electrical connections are made

Mounting of all components is complete

Verification that no shorts exist in the entire system

DO NOT

install equipment or route wiring or cords in the deployment path of any air bag.

When drilling into the vehicle, DO make sure that both sides of the surface are clear of

anything that could be damaged.

CAUTION:

If wiring is shorted to the frame, high current conductors can cause hazardous

sparks resulting in electrical fires or flying molten metal.

After installation:

Test the docking station to ensure that it is working properly.

File these instructions in a safe place and refer to them when performing maintenance or re-

installing.

WARNING

: Failure to follow all safety precautions and instructions may result in property

damage, serious injury, or death.

Safety is dependent on the proper installation and servicing of this docking station. It is

important to read and follow all instructions before installing this product.

To properly install a Gamber-Johnson docking station you must have a good understanding of

automotive electrical procedures and systems, along with proficiency in the installation and

service of aftermarket vehicle equipment.

There are no adjustments required at any time of the electrical components within the

docking station.

Opening the docking station will void the product warranty.

IMPORTANT SAFETY INFORMATION FOR INSTALLERS

2/5

Produkt Specifikationer

Mærke:	Gamber-Johnson
Kategori:	Vugge/dockingstation
Model:	7160-0880

Har du brug for hjælp?

Hvis du har brug for hjælp til Gamber-Johnson 7160-0880 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vugge/dockingstation Gamber-Johnson Manualer

Gamber-Johnson 7170-0551-03 Manual

3 September 2024

Gamber-Johnson 7160-1642-00 Manual

3 September 2024

Gamber-Johnson 7160-1882-00 Manual

3 September 2024

Gamber-Johnson 7160-1883-00 Manual

3 September 2024

Gamber-Johnson 7160-1882-10 Manual

3 September 2024

Gamber-Johnson 7160-1584-00 Manual

3 September 2024

Gamber-Johnson 7160-1884-00 Manual

3 September 2024

Gamber-Johnson 7160-1084 Manual

29 August 2024

Gamber-Johnson 7160-1418 Manual

29 August 2024

Gamber-Johnson 7160-1368 Manual

29 August 2024

Vugge/dockingstation Manualer

Nyeste Vugge/dockingstation Manualer

Bigben CBLNEONFLAMS Manual

31 Marts 2025

Crestron TSR-310-DS Manual

26 Marts 2025

Havit SK900BT Manual

12 Marts 2025

LogiLink UA0410 Manual

10 Marts 2025

Alogic DX2 Manual

10 Februar 2025

Manhattan 190398 Manual

2 Februar 2025

Magnavox MMA3645 Manual

7 Januar 2025

Magnavox MMA3639 Manual

7 Januar 2025

BenQ beCreatus GR10 Manual

3 Januar 2025

IOPLEE IOPEXTSPKER405G Manual

2 Januar 2025