Gamber-Johnson 7160-1584-00 Manual

Gamber-Johnson Vugge/dockingstation 7160-1584-00

Læs gratis den danske manual til Gamber-Johnson 7160-1584-00 (6 sider) i kategorien Vugge/dockingstation. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Gamber-Johnson 7160-1584-00, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Form RevisionProduct

INSTALLATION INSTRUCTIONS

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

7160-1584-XX

F110 DOCKING STATION

Rev C INST-1052

Printing Spec: PS-001

This instruction sheet is for the following products:

Item No. 7160-1584-00 No RF

Item No. 7160-1584-03 Tri-RF

Item No. 7160-1584-20 No RF WITH ACCELEROMETER

Item No. 7160-1584-23 Tri-RF WITH ACCELEROMETER

Item No. 7160-1584-30 No RF WITH ACCELEROMETER POWERED RS232

Item No. 7160-1584-33 Tri-RF WITH ACCELEROMETER POWERED RS232

Item No. 7160-1584-40 No RF WITH POWERED RS232

Item No. 7160-1584-43 Tri-RF WITH POWERED RS232

1/6

This instruction sheet is for the F110 docking station only. For instructions on features,

set-up, and operation of the F110 computer, please refer to the manual provided by

Getac with the computer.

This docking station is designed to be used with a variety of Gamber-Johnson mounting

systems. Installation instructions for other Gamber-Johnson products are provided with

each individual product.

During Installation:

DO NOT connect this docking station to the vehicle battery until:

All other electrical connections are made1.

Mounting of all components is complete2.

Verification that no shorts exist in the entire system3.

DO NOT install equipment or route wiring or cords in the deployment path of any air bag.

When drilling into the vehicle, DO make sure that both sides of the surface are clear of anything that

could be damaged.

CAUTION: If wiring is shorted to the frame, high current conductors can cause hazardous sparks

resulting in electrical fires or flying molten metal.

After installation:

Test the docking station to ensure that it is working properly.

File these instructions in a safe place and refer to them when performing maintenance or re-

installing.

WARNING: Failure to follow all safety precautions and instructions may result in property damage,

serious injury, or death.

IMPORTANT SAFETY INFORMATION FOR INSTALLERS

Safety is dependent on the proper installation and servicing of this docking station. It is important to

read and follow all instructions before installing this product.

To properly install a Gamber-Johnson docking station you must have a good understanding of

automotive electrical procedures and systems, along with proficiency in the installation and service of

aftermarket vehicle equipment.

There are no adjustments required at any time of the electrical components within the docking station.

Opening the docking station will void the product warranty.

Conduct a "Bench Test"

Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and

software issues are resolved prior to installation:

Make sure the computer is operational by itself.1.

Insert computer into the docking station and verify that the computer is 2.

operating in the dock.

Interconnect entire assembly and verify start-up of all components, including 3.

other equipment (printers, modems, scanners, etc.)

Gamber-Johnson recommends positioning of all mounts and equipment in the vehicle

prior to the actual install to verify that mounting locations are safe and practical.

PRE-INSTALLATION RECOMMENDATOINS

2 / 6

Produkt Specifikationer

Mærke:	Gamber-Johnson
Kategori:	Vugge/dockingstation
Model:	7160-1584-00

Har du brug for hjælp?

Hvis du har brug for hjælp til Gamber-Johnson 7160-1584-00 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vugge/dockingstation Gamber-Johnson Manualer

Gamber-Johnson 7170-0551-03 Manual

3 September 2024

Gamber-Johnson 7160-1642-00 Manual

3 September 2024

Gamber-Johnson 7160-1882-00 Manual

3 September 2024

Gamber-Johnson 7160-1883-00 Manual

3 September 2024

Gamber-Johnson 7160-1882-10 Manual

3 September 2024

Gamber-Johnson 7160-1584-00 Manual

3 September 2024

Gamber-Johnson 7160-1884-00 Manual

3 September 2024

Gamber-Johnson 7160-1084 Manual

29 August 2024

Gamber-Johnson 7160-1418 Manual

29 August 2024

Gamber-Johnson 7160-1368 Manual

29 August 2024

Vugge/dockingstation Manualer

Nyeste Vugge/dockingstation Manualer

Bigben CBLNEONFLAMS Manual

31 Marts 2025

Crestron TSR-310-DS Manual

26 Marts 2025

Havit SK900BT Manual

12 Marts 2025

LogiLink UA0410 Manual

10 Marts 2025

Alogic DX2 Manual

10 Februar 2025

Manhattan 190398 Manual

2 Februar 2025

Magnavox MMA3645 Manual

7 Januar 2025

Magnavox MMA3639 Manual

7 Januar 2025

BenQ beCreatus GR10 Manual

3 Januar 2025

IOPLEE IOPEXTSPKER405G Manual

2 Januar 2025