GIMA HTD8816C Manual

GIMA Termometer HTD8816C

Læs gratis den danske manual til GIMA HTD8816C (16 sider) i kategorien Termometer. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om GIMA HTD8816C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

TERMOMETRO A DISTANZA A INFRAROSSI

NON-CONTACT INFRARED BODY THERMOMETER

THERMOMÈTRE À INFRAROUGES

SANS CONTACT

TERMÓMETRO INFRARROJO

SIN CONTACTO

M25583-M-Rev.0-04.20

PROFESSIONAL MEDICAL PRODUCTS

25583

Hetaida Technology Co., Ltd.

4F, BaiShiDa High-Tech Park, XiangDong

Industrial Area, DaLingShan Town, DongGuan City,

Guangdong, China

Made in China

WellKang Ltd,

16 Castle St, Dover, CT16 1PW Dover,

CT16 1PW, UK

0598

IP22

Importato da / Imported by / Importé de / Importado de:

Gima S.p.A.

Via Marconi, 1

20060 Gessate (MI) Italy

Modello / Model / Modèle / Modelo: HTD8816C

Safety Information

This device may only be used for the purposes described in these instructions. The

manufacturer cannot be held liable for damage caused by incorrect application.

The non contact infrared body thermometer is designed to minimize the possibility of

hazards from errors in the software program by following sound and light engineering

design processes, Risk Analysis and Software Validation.

Warning

• The non contact infrared body thermometer is a medical device, and can be used

repeatedly, which using life is 5 years.

• The Non Contact Infrared Body Thermometer is to be operated by consumers in the

home setting and primary care setting as screening tool. This manual, accessories,

Directions for Use, all precautionary information, and specications should be read

before use.

• This product is designed to measure human body temperature on the forehead. Do

not use it for any other purpose.

• This product is intended in the home setting and primary care setting as screening

tool.

• Do not use the thermometer if it malfunctions or has been damaged in any matter.

• When the ambient temperature of the thermometer changes too much, such as

moving the Thermometer from one place of lower temperature to another place

of higher temperature, Allow the thermometer to remain in a room for 30 minutes

where the temperature is between15℃to 40℃ (59℉- 104℉).

• Remove primary batteries if equipment is not likely to be used for long time.

• This product is not waterproof, do not be immersed in water or other liquid; If clean-

ing and disinfection, please follow the “Care and Storage” section requirements.

• Do not touch the sensor of infrared detection with your ngers.

• If a cold compress on the forehead fever patients, or take other measures to cool

down the temperature data will low, should be avoided in this case to measure body

temperature.

• If measure human forehead temperature , please select “body” mode; for measure

other objects, liquids, food and other temperature please select “surface” mode.

• This product must be operated in a stable environment, if the ambient environment

was mutations, please should be note whether there is fog on the sensor, if any,

before using accordance with the “Care and Storage” section to removing the fog.

• Do not near strong electrostatic eld or strong magnetic elds, thus avoiding the

impact on the accuracy of the measurement data.

• Do not mix the old and new batteries to avoid damage to the product.

• It may affect the accuracy of measurements when the forehead is covered by hair,

ENGLISH

Produkt Specifikationer

Mærke:	GIMA
Kategori:	Termometer
Model:	HTD8816C

Har du brug for hjælp?

Hvis du har brug for hjælp til GIMA HTD8816C stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termometer GIMA Manualer

30 August 2024

30 August 2024

25 August 2024

25 August 2024

25 August 2024

27 November 2022

Termometer Manualer

Nyeste Termometer Manualer

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

13 Juni 2025

13 Juni 2025

13 Juni 2025

CDN ProAccurate FG80 Manual

12 Juni 2025

CDN ProAccurate RFT1 Manual

12 Juni 2025