Gira DALI 2030 00 Manual

Gira Lettelse DALI 2030 00

Læs gratis den danske manual til Gira DALI 2030 00 (14 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Gira DALI 2030 00, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/14
Wireless DALI control unit, 1-gang Mini
Wireless DALI control unit, 1-gang Mini
Wireless DALI control unit, 1-gang Mini
Wireless DALI control unit, 1-gang Mini
Wireless DALI control unit, 1-gang MiniWireless DALI control unit, 1-gang Mini
Order no.: 5422 00
Operating instructions
Operating instructions
Operating instructions
Operating instructionsOperating instructions
1
1
1
11 Safety instructions
Safety instructions
Safety instructions
Safety instructionsSafety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. InDanger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
device and or load.
device and or load.
device and or load.device and or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.Danger of electric shock. Device is not suitable for disconnection from supply voltage.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.
Further information about this device can be found in the operation manual on our web-
site.
2
2
2
22 Device components
Device components
Device components
Device componentsDevice components
Figure1: Front view
(1) Operating mode switch
(2) Button Prog
Prog
Prog
ProgProg
(3) Status LED
(4) Measuring points for voltage measurement, terminals rear-mounted
3
3
3
33 Intended use
Intended use
Intended use
Intended useIntended use
– Switching and brightness setting of DALI luminaires
– Operation with suitable radio transmitters
– Mounting in appliance box according to DIN 49073 in combination with a suitable cover
– Installation in surface-mounted housing or panel-mounted housing (accessories) for sus-
pended ceilings
Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
– Joint operation of all the connected DALI ballasts, broadcast.
1 / 14
32580922 10864978 22.08.2019
Wireless DALI control unit, 1-gang Mini
– Electronic short-circuit protection of the DALI supply with permanent switch-off after 8
seconds
– Electronic over-temperature protection of the DALI supply with self-retain
– DALI supply for a maximum of 12 subscribers
– Parallel switching of up to 6 DALI control units with the option of supplying up to 72 DALI
subscribers
– Switch-on brightness can be saved permanently
– Minimum brightness can be saved permanently
– Scene operation possible
– Status indication with LED
– Status feedback to radio transmitter
– DALI ballast is switchable with Prog
Prog
Prog
ProgProg button
Can be set with eNet server:
– Maximum brightness
– Dimming speed
– Switch-on delay / switch-off delay
– Dim up/dim down ramp
– Switch-off warning
– Operation locks
– Continuous on, Continuous off
– Hotel function
– Run-on time
– Light control
When operating with the eNet Server, operation and signalling could vary from what is de-
scribed here.
Supplementary functions with eNet Server:
– Fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
– Update of the device software
– Repeater function
– Reading of error memory
Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
– Joint operation of all the connected DALI ballasts, broadcast.
– Electronic short-circuit protection of the DALI supply with permanent switch-off after 8
seconds
– Electronic over-temperature protection of the DALI supply with self-retain
– DALI supply for a maximum of 12 subscribers
– Parallel switching of up to 6 DALI control units with the option of supplying up to 72 DALI
subscribers
– Switch-on brightness can be saved permanently
– Minimum brightness can be saved permanently
– Scene operation possible
– Status indication with LED
– Status feedback to radio transmitter
– DALI ballast is switchable with Prog
Prog
Prog
ProgProg button
Can be set with eNet server:
– Maximum brightness
– Dimming speed
– Switch-on delay / switch-off delay
– Dim up/dim down ramp
2 / 14
32580922 10864978 22.08.2019

Produkt Specifikationer

Mærke: Gira
Kategori: Lettelse
Model: DALI 2030 00

Har du brug for hjælp?

Hvis du har brug for hjælp til Gira DALI 2030 00 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lettelse Gira Manualer

Gira

Gira DALI 2030 00 Manual

10 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Dainolite

Dainolite V166-1W Manual

5 April 2025
Dainolite

Dainolite OFE-161P Manual

5 April 2025
Dainolite

Dainolite DMLED10-A-5D Manual

5 April 2025
Dainolite

Dainolite DM1958F Manual

5 April 2025
NUVO

NUVO Ballerina 60/1265 Manual

4 April 2025
NUVO

NUVO SF77/196 Manual

4 April 2025
NUVO

NUVO Ballerina 60/329 Manual

4 April 2025
NUVO

NUVO Cordello 60/7883 Manual

4 April 2025
NUVO

NUVO Destin 60/7706 Manual

4 April 2025
NUVO

NUVO Livingston 60/7669 Manual

4 April 2025