Godox MS300 Manual

Godox Lys MS300

Læs gratis den danske manual til Godox MS300 (6 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om Godox MS300, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
705-MS0000-00 Made In China 说 明 手 册
Instruction Manual
中英文双语
Chinese English Bilingual
地址/ 深圳市宝安区福海街道塘尾社区耀川工业区厂房 栋 层至 层、 栋 层至 层Add: 2 1 4 4 1 4
1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone,
Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China
电话/Tel: +86-755-29609320(8062) Fax: +86-755-25723423 传真/
邮箱/ E-mail: godox@godox.com http://www.godox.com
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
MS Series Compact Studio Flash
系 列 影 室 闪 光 灯
FOREWORD
Thanks for choosing MS series studio flash. It is a lightweight, compact and
durable flash with complete functions. Design for shooting studio portrait and
e-commerce product. This product is suitable for head shot, waist shoot, and
certificate photography, as well as product shooting, etc. It can also offer high
light, background light, or hair light in large studios and workshops. The MS
flash offers:
CONTENTS
14 • Slave Trigger Model
15 • Buzz Function
15 • Key Combination
15 • Alarm Display
15 • Memory Function
15 • Over-Temperature
Protection Function
15 • Wireless Control Function
17 • Tube Replacement
17 Technical Data
18 Maintenance
Use optional X1, XT16 or FT-16 trigger to control the flash power ratio, modeling
lamp and buzzer, as well as flash triggering
Built-in Godox 2.4G wireless X system
Precise output displayed on LCD panel, 50 steps from 1/32 to 1/1 (or 5.0 to 10.0)
Anti-preflash function enables synchronization with cameras that have a one-
preflash firing system
Outstanding output stability, no more than 2% shifts when under the same output
150W modeling lamp adjusts in 5% to 100% power levels
Compact and lightweight body with Bowens mount to add almost any studio light
shapers
Auto memory and recovery of adjusted panel settings
09 Foreword
10 Warning
Names of Parts11
11 • Body
12 • LCD Panel
12 • Accessories
12 • Separately Sold Accessories
13 Operations
13 • Flash Preparation
13 • Power Connection
13 • Modeling Lamp
14 • Power Output Control
14 • Test Button
14 • Sync Triggering
14 • GR/CH Button
To prevent damage to the product or injury to you or to others, read the
following warnings in their entirety before using this product. Keep these
safety instructions where users can read them for ready reference.
Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.
The apparatus shall not be exposed to tripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
The MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
An apparatus with CLASS I construction shall be connected to a MAINS socket
outlet with a protective earthing connection.
After 30 continuous flashes at full power, the flash should be cooled down for
about 3 minutes. Overheating will occur if it is used continuously without cooling
down.
Do not keep using the modeling lamp for a long time; otherwise flammable
accessories attaching to flash head, e.g. softbox will get burnt. A 10-minute time
is recommended in this case. After 10 minutes, cool it down for 1 minute.
When using a snoot, do not keep the modeling lamp on for a long time or fire too
frequently (not over six times for one minute). Overheating will result in damages
for strobe housing and/or studio light.
Do not disassemble or modify. Should the product break down, send the
defective back to the authorized service center for inspection and maintenance.
Keep dry. Do not handle with wet hands, immerse in water, or expose to rain.
Keep out of reach of children.
Please put the device in a ventilation environment and keep the parts of lighting
and heat dissipation holes are unobstructed. Do not use in flammable
environment.
As this product adopts make and break device, please keep it easy to be used.
No touching the heating parts of this product.
Please turn off the power and wear insulated gloves before installing and
connecting accessories. When replacing the tube or modeling lamp, please
make sure that the tube is cool and wear insulated gloves to prevent burns.
Do not flash directly towards naked eyes (especially those of babies), otherwise
it may lead to visual impairment.
Disconnect from the power supply when it will not be used for an extended
period.
For continued protection against risk of fire replace only with same Type F8AL
250V fuse.
Warning
- 09 - - 10 -

Produkt Specifikationer

Mærke: Godox
Kategori: Lys
Model: MS300

Jeg vil ændre lysmængden på mine ms300, jeg forstår ikke indstillingen hvordan der kommer mindre lys

  Kenneth - 9 Februar 2025

Har du brug for hjælp?

Hvis du har brug for hjælp til Godox MS300 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lys Godox Manualer

Godox

Godox Knowled P1200R Hard PRO Manual

8 Oktober 2025
Godox

Godox LC1000R Manual

4 September 2025
Godox

Godox LC1000Bi Manual

4 September 2025
Godox

Godox LC500R mini Manual

4 September 2025
Godox

Godox TL180 Manual

4 September 2025
Godox

Godox E250 Manual

4 September 2025
Godox

Godox LC500 mini Manual

3 September 2025
Godox

Godox P1200R Hard Manual

29 August 2025
Godox

Godox P120Bi Manual

27 August 2025
Godox

Godox Knowled MS60Bi Manual

26 August 2025

Lys Manualer

Nyeste Lys Manualer

Lucide

Lucide Palm 13523/01/31 Manual

16 Oktober 2025
Lucide

Lucide Palm Manual

16 Oktober 2025
Emos

Emos ZB3614 Manual

16 Oktober 2025
Lucide

Lucide Cactus 13513/01/68 Manual

16 Oktober 2025
Lucide

Lucide Tahar 46904/02/31 Manual

16 Oktober 2025
Emos

Emos D4AW25 Manual

15 Oktober 2025
Lucide

Lucide Saxen 40200/01/11 Manual

15 Oktober 2025
Lucide

Lucide Safiya Manual

15 Oktober 2025
Photoflex

Photoflex LiteDome Manual

15 Oktober 2025
Emos

Emos D5AC25 Manual

15 Oktober 2025