Greisinger GTMU-MP Manual

Greisinger Termometer GTMU-MP

Læs gratis den danske manual til Greisinger GTMU-MP (6 sider) i kategorien Termometer. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Greisinger GTMU-MP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

T .0.4X.6C-0320

GREISINGER electronic GmbH

D - 93128 Regenstauf, Hans-Sachs-Straße 26



 +49 (0) 9402 / 9383-0  +49 (0) 9402 / 9383-33  info@greisinger.de

Transmitter fo temperature r

from version V3.2 Operating Manual GTM - U MP

Content

1 INTENDED USE 2

2 GENERAL ADVICE 2

3 SAFETY INSTRUCTIONS 2

4 DISPOSAL NOTES 2

5 ASSIGNMENT OF ELBOW-TYPE PLUG (DEPENDING ON TYPE) 3

6 GENERAL INSTALLATION INSTRUCTIONS: 3

7 DESIGN TYPES, DIMENSION 3

8 DISPLAY FUNCTIONS 4

8.1 M 4 EASURING DISPLAY

8.2 M V IN/MAX ALUE EMORYM 4

9 ERROR AND SYSTEM MESSAGES 4

10 CONFIGURATION OF THE DEVICE 5

11 NOTES TO THE CALIBRATION SERVICES 6

12 SPECIFICATION 6

WEEE-Reg.-№: DE93889386

T20.0.4X.6C-03 Operating Manual GTMU - page 2 of 6 MP

_____________________________________________________ _____________________________________________________________________________

1 Intended use

The device measures the temperature of air or non corrosive / non ionizing gases.

The safety instructions (see chapter 3) have to be observed.

The device must not be used for purposes and under conditions for that the device had not been designed.

The device must carefully dealt with and has to be used according to the specications (do not throw, knock,

etc.). It has to be protected against dirt.

Do not expose the sensor to aggressive gases (like ammonia) for longer time.

Avoid condensation, as after drying there may remain residues, which may aect the precision negatively.

In dusty environment additional protection has to be applied (special protection caps).

2 General advice

Read through this document attentively and make yourself familiar to the operation of the device before you

use it. Keep this document in a ready- -hand way in order to be able to look up in the case of doubt to .

3 Safety instructions

This device has been designed and tested in accordance to the safety regulations for electronic devices.

However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures

and special safety advises given in this manual will be adhered to when using it.

1. Trouble-free operation and reliability of the device can only be guaranteed if it is not subjected to any

other climatic conditions than those stated under “Specification”.

Transporting the device from a cold to a warm environment condensation may result in a failure of the

function. In such a case make sure the device temperature has adjusted to the ambient temperature

before trying a new start- up.

2. General instructions and safety regulations for electric, light and heavy current plants, including domestic

safety regulations (e.g. VDE), have to be observed.

3. If device is to be connected to other devices (e.g. via PC) the circuitry has to be designed most carefully.

Internal connection in third party devices (e.g. connection GND and earth) may result in not-permissible

voltages impairing or destroying the device or another device connected.

4. Whenever there may be a risk whatsoever involved in running it, the device has to be switched o

immediately and to be marked accordingly to avoid re-starting. Operator safety may be a risk if:

- there is visible damage to the device

- the device is not working as specied

- the device has been stored under unsuitable conditions for a longer time

In case of doubt, please return device to manufacturer for repair or maintenance.

5. Do not use this product as safety or emergency stop device or in any other application where Warning:

failure of the product could result in personal injury or material damage.

Failure to comply with these instructions could result in death or serious injury and material damage.

4 Disposal notes

This device must not be disposed as “residual waste”.

To dispose this device, please send it directly to us (adequately stamped).

We will dispose it appropriately and environmentally friendly.

Produkt Specifikationer

Mærke:	Greisinger
Kategori:	Termometer
Model:	GTMU-MP

Har du brug for hjælp?

Hvis du har brug for hjælp til Greisinger GTMU-MP stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termometer Greisinger Manualer

Greisinger GMH 2710-G Manual

28 August 2024

Greisinger G 1200 Manual

14 August 2024

Greisinger GMH 3750 Manual

11 August 2024

Greisinger GTH 200 air Manual

2 August 2024

Greisinger GMH 2710K Manual

2 August 2024

Greisinger G1200 Manual

2 August 2024

Greisinger GTMU-MP Manual

2 August 2024

Termometer Manualer

Nyeste Termometer Manualer

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

13 Juni 2025

13 Juni 2025

13 Juni 2025

CDN ProAccurate FG80 Manual

12 Juni 2025

CDN ProAccurate RFT1 Manual

12 Juni 2025