GW Instek ASR-2100 Manual

GW Instek Ikke kategoriseret ASR-2100

Læs gratis den danske manual til GW Instek ASR-2100 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 68 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 34.5 anmeldelser. Har du et spørgsmål om GW Instek ASR-2100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Output Rating: AC 0 ~ 350 Vrms,

DC 0 ~ ± 500 V

Output Frequency up to 999.9 Hz

DC Output (100% of Rated Power)

Output Capacity: 500VA/ 1000VA

Measurement Items: Vrms, Vavg, Vpeak,

Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF

Voltage and Current Harmonic Analysis

(THDv, THDi)

Customized Phase Angle for Output

On/Off

Remote Sensing Capability

OVP, OCP, OPP, OTP, AC Fail Detection

and Fan Fail Alarm

Interface: USB,LAN ;RS-232+GPIB

(std.) (opt)

Built-in External Control I/O and

External Signal Input

Built-in Output Relay Control

Memory Function (up to 10 sets)

Sequence and Simulation Function

(up to 10 sets)

Support Arbitrary Waveform Function

Built-in Web Server

LAN

ASR-2000 Series

Simply Reliable

Electronic Products Electronic/

Component Development Test

Automotive Electrical Equipment

Simulation Test

Household Appliance Application Test

FEATURES

Rear Panel

APPLICATIONS

Front Panel

COMPACT PROGRAMMABLE AC/DC POWER SOURCE

ASR-2000 Series

Ext I/O

MAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask

*1. The voltage display is set to RMS in AC/AC+DC mode and AVG in DC mode.

*2. AC mode: For an output voltage of 17.5 V to 175 V / 35 V to 350 V and 23 °C ± 5 °C. DC mode: For an output voltage of 25 V to 250 V / 50 V to 500 V and 23 °C ± 5 °C.

*3. An output current in the range of 5 % to 100 % of the maximum current, and 23 °C ± 5 °C.

*4. An output current in the range of 5 % to 100 % of the maximum peak current in AC mode, an output current in the range of 5 % to 100 % of the maximum instantaneous current in DC mode,

and 23 °C ± 5 °C. The accuracy of the peak value is for a waveform of DC or sine wave

*5. For an output voltage of 50 V or greater, an output current in the range of 10 % to 100 % of the maximum current, DC or an output frequency of 45 Hz to 65 Hz, and 23 °C ± 5 °C.

*6. The apparent and reactive powers are not displayed in the DC mode.

*7. The reactive power is for the load with the power factor 0.5 or lower. *8. An output voltage in the range of 17.5 V to 175 V / 35 V to 350 V and 23 °C ± 5 °C.

ASR-2000GD1DH

Specifications subject to change without notice.

ASR-2100/ASR-2100R

Up to 20th ± (1 % of reading + 0.2 A / 0.1 A);

20th to 40th ± (1.5 % of reading + 0.2 A / 0.1 A)

OCP, OTP, OPP, FAN Fail

TFT-LCD, 4.3 inch

10 sets for Store and Recall settings

16 (nonvolatile)

4096 words

Type A: Host, Type B: Slave, Speed: 1.1/2.0, USB-CDC

External Signal Input; External Control I/O

SCPI-1993, IEEE 488.2 compliant interface

Complies with the EIA-RS-232 speciﬁcations

500 Vdc, 30 M or moreΩ

1500 Vac, 1 minute

EN 61326-1 (Class A)

EN 61326-2-1/-2-2 (Class A)

EN 61000-3-2 (Class A, Group 1)

EN 61000-3-3 (Class A, Group 1)

EN 61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-8/-4-11 (Class A, Group 1)

EN 55011 (Class A, Group1)

EN 61010-1

Indoor use, Overvoltage Category II

0 °C to 40 °C

-10 °C to 70 °C

20 %rh to 80 % RH (no condensation)

90 % RH or less (no condensation)

Up to 2000 m

ASR-2000 : 285(W)×124(H)×480(D) (not including protrusions); Approx. 11.5 kg

ASR-2000R : 213(W)×124(H)×480(D) (not including protrusions); Approx. 10.5 kg

PROTECTIONS

DISPLAY

MEMORY FUNCTION

ARBITRARY WAVE Number of Memories

Waveform Length

OTHERS

INTERFACE USB

LAN

EXT Control

Factory Optional GPIB

RS-232C

INSULATION RESISTANCE

Between input and chassis, output and chassis, input and output

WITHSTAND VOLTAGE

Between input and chassis, output and chassis, input and output

EMC

Safety

Environment Operating Environment

Operating Temperature Range

Storage Temperature Range

Operating Humidity Range

Storage Humidity Range

Altitude

DIMENSIONS & WEIGHT

Standard

ASR 2050/ASR-2050R-

Full Scale

Resolution

Accuracy*3

5 A / 2.5 A, 100% 10 A / 5 A, 100%

0.01 A, 0.01% 0.01 A, 0.01%

Up to 20th ± (1 % of reading + 0.1 A / 0.05 A);

20th to 40th ± (1.5 % of reading + 0.1 A / 0.05 A)

EFFECTIVE VALUE (RMS)

PERCENT (%)

(AC-INT and 50/60 Hz only)

Resolution

Accuracy*8

Range

0.1 V, 0.01% 0.1 V, 0.01%

Up to 20th ± (0.2 % of reading + 0.5 V / 1 V);

20th to 40th ± (0.3 % of reading + 0.5 V / 1 V)

Up to 20th ± (0.2 % of reading + 0.5 V / 1 V);

20th to 40th ± (0.3 % of reading + 0.5 V / 1 V)

Up to 40th order of the fundamental wave Up to 40th order of the fundamental wave

PERCENT (%)

(AC-INT and 50/60 Hz only)

HARMONIC CURRENT

SPECIFICATIONS

Range

Full Scale

Up to 40th order of the fundamental wave Up to 40th order of the fundamental wave

175 V / 350 V, 100% 175 V / 350 V, 100%

HARMONIC VOLTAGE

EFFECTIVE VALUE (RMS)

The ASR-2000 series, an AC+DC power source aiming for system integration or desktop

applications, provides both rated power output for AC output and rated power output

for DC output. Nine ASR-2000 output modes are available, including 1) AC power

output mode (AC-INT Mode), 2) DC power output mode (DC-INT Mode), 3) AC/DC

power output mode (AC+DC-INT Mode), 4) External AC signal source mode (AC-EXT

Mode), 5) External AC/DC signal source mode (AC+DC-EXT Mode), 6) External AC

signal superposition mode (AC-ADD Mode), 7) External AC/DC signal superposition

mode (AC+DC-ADD Mode), 8) External AC signal synchronization mode (AC-SYNC

Mode), 9) External AC/DC signal synchronization mode (AC+DC-SYNC Mode).

The ASR-2000 series provides users with waveform output capabilities to meet the test

requirements of different electronic component development, automotive electrical

devices and home appliance, including 1) Sequence mode generates waveform fallings,

surges, sags, changes and other abnormal power line conditions; 2) Arbitrary waveform

function allows users to store/upload user-defined waveforms; and 3) Simulate mode

simulates power outage, voltage rise, voltage fall, and frequency variations. When the

ASR-2000 series power source outputs, it can also measure Vrms, Vavg, Vpeak, Irms,

Iavg, Ipeak, IpkH, P, S, Q, PF, CF, 40th-order Voltage Harmonic and Current Harmonic.

In addition, the Remote sense function ensures accurate voltage output. The

Customized Phase Angle for Output On/Off function can set the starting angle and

ending angle of the voltage output according to the test requirements. V-Limit, Ipeak-

Limit, F-Limit, OVP, OCP, OPP function settings can protect the DUT during the

measurement process. In addition to OTP, OCP, and OPP protection, the ASR-2000

series also incorporates the Fan fail alarm function and AC fail alarm function.

The front panel of the ASR-2050/2100 provides a universal socket or a European socket,

which allows users to plug and use so as to save wiring time. The ASR-2050R/2100R is

3U height and 1/2 Rack width design, which is compatible with ATS assembly. The ASR-

2000 series supports I/O interface and is equipped with USB, LAN, External I/O and

optional RS-232C and GPIB.

Extended Universal Power Socket(ASR-2000R only)

Extended European Power Socket(ASR-2000R only)

ACCESSORIES

FREE DOWNLOAD

CD ROM(User Manual, Programming manual), Safety Guide, Power Cord,

Mains Terminal Cover Set, Remote Sense Terminal Cover Set, GTL-123 Test Lead,

GTL-246 USB Cable

Rack Mount Kit (EIA)

Rack Mount Kit (JIS)

RS-232C Cable, approx. 2M

GPIB Cable, approx. 2M, including

25 pins Micro-D connector

GET-003

GET-004

GRA-439-E

GRA-439-J

GTL-232

GTL-258

ASR-001 Air inlet filter

USB Driver

OPTIONAL ACCESSORIES

ORDERING INFORMATION

Opt01 : RS-232+GPIB Communication Functions(Factory installed)

Opt02 : European Output Outlet only for ASR-2000(Factory installed)

ASR-2050 500VA Programmable AC/DC Power Source

ASR-2100 1000VA Programmable AC/DC Power Source

ASR-2050R

500VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount

ASR-2100R

1000VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount

Produkt Specifikationer

Mærke:	GW Instek
Kategori:	Ikke kategoriseret
Model:	ASR-2100

Har du brug for hjælp?

Hvis du har brug for hjælp til GW Instek ASR-2100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret GW Instek Manualer

GW Instek GPE-3323A Manual

10 September 2025

GW Instek GPE-1326A Manual

10 September 2025

GW Instek GPE-1205 Manual

10 September 2025

GW Instek GPE-4323A Manual

9 September 2025

GW Instek GPE-2323A Manual

9 September 2025

GW Instek ASR-3500 Manual

9 September 2025

GW Instek GPE-1323 Manual

9 September 2025

GW Instek ASR-2100R Manual

1 Februar 2025

GW Instek ASR-2100 Manual

1 Februar 2025

GW Instek GHT-118 Manual

14 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

DS18 VOC8PRO Manual

5 November 2025

Icron Rover 2850 Manual

5 November 2025

Amaran Peak Manual

5 November 2025

WesAudio Timbre Manual

5 November 2025

MuxLab 500800-TX Manual

5 November 2025

Tripp Lite PDUMH30HVATNET Manual

5 November 2025

NeXtime Plug Inn 2610 ZI Manual

5 November 2025

MSI MS-ND82 Manual

5 November 2025

Sonifex Redbox RB-MSP6 Manual

5 November 2025

NeXtime Plug Inn 2610 ZW Manual

5 November 2025