INSTALL INSTRUCTIONS
C-DMM-130 Swing out Dash Monitor Mount
2015-2017 Chevy Tahoe Police Pursuit Vehicle (PPV) and
2015-2017 Chevy Tahoe Special Service Vehicle (SS V)
**Does NOT work in Standard Retail Tahoe or Suburban because of OEM display options**
The Dash Monitor Mount bracket system requires two or three main parts that are Sold
Separately. See web site Monitor Configurator for more detailed bracket information.
http://www.havis.com/monitor_mounts.htm
1 - Vehicle Specific dash mount bracket. (C-DMM-130)
1 - Computer Specific Monitor adaptor bracket. (C- -200 series) MM
1 - Offset adaptor bracket. - -301) (C MM
The C- - offset adaptor goes between the C-DMM-130 and C- -2XX. It may not be MM 301 MM
required in some applications.
TOOLS REQUIRED:
• Ratchet • 7/16” •Wrench Open End Wrench - Air saw
• Socket Set • Phillips Screwdriver
MOUNT BRACKET PARTS and HARDWARE:
QTY: DESCRIPTION: PART #:
1 Upper Support Bracket CM006719
1 Lower Bracket Extension CM006724
1 Lower Support Bracket CM006725
6 Side Support Bracket CM006925
6 10/32 x 1/2" Phillips Pan head machine screw GSM33117
2 8/32 x 1/2" Phillips Pan Head Machine screw GSM33110
2 8/32 Keps Nuts GSM30027
6 # 10 GSM31003 ” Flat Washer
2 GSM31002 # 8” Flat Washer
2 1/4-20 x 5/8" Truss head bolts GSM34401
4 1/4-20 Flat Washer GSM31000
2 1/4-20 Serrated Nuts GSM31003
2 M6 x1.0 x 20mm Machine bolt GSM33711
1 Monitor Adapter Hardware Varies (monitor specific)
ALWAYS!
• Read all instructions before installing any Havis, Inc products.
• Use hardware provided with install kit
Note: If installing the C-DMM- with C- - - -1 console, the DMM lower bracket assembly will 130 a VS 1013 TAH
not be used. Accessory pocket modiication and lower bracket mounting as shown in these instructions
will Not be required. The C-DMM-130 frame will bolt to the top of the C-1013-TAH-1 console.
Also review the C- -1013- -1 instructions before starting installation. VS TAH