Havis C-DMM-134 Manual

Havis Ikke kategoriseret C-DMM-134

Læs gratis den danske manual til Havis C-DMM-134 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Havis C-DMM-134, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

C‐DMM‐134_INST_5‐17



INSTALLATIONINSTRUCTIONS

C‐DMM‐134

2011 2018‐ NissanFrontier

SWING‐OUT MOUNTDASHMONITOR 

Always!

 Read        all instructions before installing any Havis, Inc. products.

 Check            for obstructions (Wires, brake lines, fuel tank, etc.) before drilling any holes!

 Use hardware

rovidedwithinstallkit

TheDash Monitor or Mountbracketsystemmayrequiretwo threemain Sold parts that are 

Separately.SeewebsiteMonitorConfiguratorformoredetailedbracketinformation.

http://www.havis.com/monitor_mounts.htm 



 1‐VehicleSpecificdashmountbracket.(C‐DMM‐134)

 1‐ComputerSpecificMonitoradaptorbracket.(C‐MM‐200series)

 1‐Offsetadaptorbracket.(C‐MM‐301)

The required ‐C MM MM‐301offsetadaptorgoes between the ‐C DMM‐134and ‐C‐2XX.Itmaynotbe insome

applications.



Tabletdockingstations with Vesa75holepattern withoutcan DMMbe bolted directlyto ‐C adaptor.

Offset options  ‐adaptor C MM available‐303is ifadditional positioning  aredesiredfordockingstation.



TOOLSREQUIRED:(some tools are     not needed for all vehicle installations)

• & •Socketset‐metric standardPhillipsscrewdriver

• Trim •removaltools  Fileorplasticcuttingtool



HARDWAREandPARTS:



QTY:  DESCRIPTION:   PART#:  

1  Driversidelowermountingbracket  CM008634

1  Passengersidelowermountingbracket CM008635

1  Forwarduppermountingbracket  CM008527

1  Rearuppermountingbracket  CM008528

4  1/4"Serratednut    GSM30023

5 x  10‐32 1/2”Machinescrew   GSM33118

5  #10Flatwasher    GSM31003



Note:                    The swing door utilizes a gas spring to assist in opening the door and to eliminate the possibility of it