Havis C-MD-312 Manual

Havis Ikke kategoriseret C-MD-312

Læs gratis den danske manual til Havis C-MD-312 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Havis C-MD-312, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

C-HDM-312

C-HDM-200 SERIES

POLE MOUNT

4X 1/4" FLAT WASHER

4X 1/4" LOCK WASHER

4X 1/4-20 X 3/4" HEX BOLT

C-MD-312

CONSOLE

(TYPE VARIES)

4X 1/4" FLAT WASHER

4X 1/4" LOCK WASHER

4X 1/4"-20 X 3/4" HEX BOLT

2.125

.265

SURFACE MOUNTING INSTRUCTIONS

MD-312 MOTION DEVICE CAN BE MOUNTED TO ANY FLAT SURFACE, INCLUDING CONSOLE TOPS AND HDM POLES. IF SURFACE DOES NOT HAVE

PREDRILLED HOLES, USE THE DRILL TEMPLATE BELOW.

PLACE MD-310 SERIES ON TOP OF MOUNTING SURFACE, ALIGNING THE (4) THREADED

HOLES OF MD-110 SERIES BASE WITH THE (4) 1/4" HOLES THROUGH MOUNTING SURFACE.

INSTALL THE (4) HEX BOLTS, LOCK WASHERS, AND FLAT WASHERS THROUGH MOUNTING

SURFACE INTO THE THREADED HOLES OF THE MOTION DEVICE AS SHOWN IN THE

DIAGRAM BELOW.

TIGHTEN ALL HARDWARE, ENSURING LOCK WASHERS ARE FULLY COMPRESSED.

75 JACKSONVILLE RD,

WARMINSTER, PA. 18974

1-800-524-9900

SIZE

SCALE: 1:6

SHEET 1 OF 2

DO NOT SCALE DRAWING

WEIGHT (LB): NA

TITLE:

DWG. NO.

C-MD-312-INST

REV

11-17

HAVIS, INC.

INSTALLATION AND ADJUSTMENT

INSTRUCTIONS, C-MD-312

PLASTIC COVER

NOT SHOWN IN THIS VIEW

RELEASE LEVER

PULL TO RELEASE

SLIDE TRAY

USING A 9/16" SOCKET, TIGHTEN/LOOSEN NUT 4 AS REQUIRED TO ACHIEVE DESIRED

SLIDING FORCE OF SLIDE TRAY.

KNOB CAN BE TIGHTENED TO LOCK SLIDE TRAY IN ANY POSITION. STORE WITH SLIDE

TRAY FULLY COLLAPSED AND KNOB TIGHTENED. KNOB CAN BE INSTALLED ON EITHER

SIDE OF DEVICE AT USER'S PREFERENCE.

UNIT ROTATION

REMOVE PLASTIC COVER BY PULLING UPWARDS TO UNSNAP SIDE CLIPS.

USING A 9/16" SOCKET, TIGHTEN/LOOSEN NUT 5 AS REQUIRED TO ACHIEVE DESIRED

ROTATIONAL FORCE OF DEVICE WHEN RELEASE LEVER IS PULLED.

REINSTALL PLASTIC COVER BY PUSHING DOWNWARD TO ENGAGE SIDE CLIPS.

KNOB

ALTERNATE KNOB LOCATION

DETAIL A

USER ADJUSTMENTS

STANDARD

180° ROTATION

(AS SHIPPED)

1,2

OPTIONAL

90° ROTATION

(ADD SUPPLIED 1/4"

HARDWARE AS SHOWN)

OPTIONAL

*360° ROTATION

(DO NOT USE 1/4" HARDWARE)

NOT RECOMMENDED FOR

DEVICES HEAVIER THAN A

KEYBOARD

MOTION DEVICE ROTATION

USING A 1/2" SOCKET, LOOSEN NUT 1 AND ADJUST NUT 2 WITH A 1/2" WRENCH AS

REQUIRED TO ACHIEVE DESIRED ROTATIONAL FORCE OF

MOTION DEVICE. RETIGHTEN NUT 1 WITH A 1/2" SOCKET WHILE RESTRICTING NUT 2

FROM TURNING WITH A 1/2" OPEN END WRENCH.

FOR MINOR ADJUSTMENT, TIGHTEN OR LOOSEN NUT 3 USING A 7/16" SOCKET.

75 JACKSONVILLE RD,

WARMINSTER, PA. 18974

1-800-524-9900

SIZE

SCALE: 1:5

SHEET 2 OF 2

DO NOT SCALE DRAWING

WEIGHT (LB): NA

TITLE:

DWG. NO.

C-MD-312-INST

REV

11-17

HAVIS, INC.

INSTALLATION AND ADJUSTMENT

INSTRUCTIONS, C-MD-312

Produkt Specifikationer

Mærke:	Havis
Kategori:	Ikke kategoriseret
Model:	C-MD-312

Har du brug for hjælp?

Hvis du har brug for hjælp til Havis C-MD-312 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Havis Manualer

Havis CST00215 Manual

30 Januar 2025

Havis SC-1000-ACC-14 Manual

30 Januar 2025

Havis CST00216 Manual

30 Januar 2025

Havis CST00177 Manual

3 September 2024

Havis C-MAP-SL Manual

3 September 2024

Havis DS-GTC-211 Manual

3 September 2024

Havis SC-1000-CS Manual

3 September 2024

Havis C-DMM-134 Manual

3 September 2024

Havis C-MAP-S Manual

3 September 2024

Havis SC-1000-PF Manual

3 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tripp Lite U339-001-FLAT Manual

31 Juli 2025

Tripp Lite IBLOK2-0 Manual

31 Juli 2025

Tripp Lite TR-6FM Manual

31 Juli 2025

L.R.Baggs Element Active System Manual

31 Juli 2025

Tripp Lite Protect It! TLP310USBCW Manual

31 Juli 2025

Tripp Lite PR25 Manual

31 Juli 2025

SolidDrive SD-1G Manual

31 Juli 2025

Tripp Lite PR7 Manual

30 Juli 2025

Wren & Cuff 70's Your Face Fuzz Manual

30 Juli 2025

Advantech WISE-2211 Manual

30 Juli 2025