Hikvision DS-K7M-AW100 Manual

Hikvision Adgangskontrolsystem DS-K7M-AW100

Læs gratis den danske manual til Hikvision DS-K7M-AW100 (2 sider) i kategorien Adgangskontrolsystem. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Hikvision DS-K7M-AW100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

UD18549B

The ﬁgures are for reference only.

The two power outputs (12V) can be connected with the lock or

terminal.

For security reasons, you should install the rubber rings (accessory) in

the cable holes to protect the cables from being scarified by the burrs

on the cable holes.

DS-K7M-AW100 Power Supply

User Manual

This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its aﬃliates

(hereinaer referred to as “Hikvision”), and it cannot be reproduced, changed, translated, or

distributed, parally or wholly, by any means, without the prior wrien permission of Hikvision.

Unless otherwise expressly stated herein, Hikvision does not make any warranes, guarantees or

representaons, express or implied, regarding to the Manual, any informaon contained herein.

About this Manual

The Manual includes instrucons for using and managing the Product. Pictures, charts, images and

all other informaon hereinaer are for descripon and explanaon only. The informaon

contained in the Manual is subject to change, without noce, due to ﬁrmware updates or other

reasons. Please ﬁnd the latest version of this Manual at the Hikvision website (hps://www.hikvi-

sion.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporng the

Product.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properes of Hikvision in various

jurisdicons.

Other trademarks and logos menoned are the properes of their respecve owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND

“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A

PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT

WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,

AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY

LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT

RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF

HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

Data Protecon

During the use of device, personal data will be collected, stored and processed. To protect data,

the development of Hikvision devices incorporates privacy by design principles. For example, for

device with facial recognion features, biometrics data is stored in your device with encrypon

method; for ﬁngerprint device, only ﬁngerprint template will be saved, which is impossible to

reconstruct a ﬁngerprint image.

As data controller, you are advised to collect, store, process and transfer data in accordance with

the applicable data protecon laws and regulaons, including without limitaon, conducng

security controls to safeguard personal data, such as, implemenng reasonable administrave and

physical security controls, conduct periodic reviews and assessments of the eﬀecveness of your

security controls.

1Appearance

2Internal Appearance and Wiring

373 mm

370 mm 92.3 mm

89.8 mm

345 mm

Key Hole Cable Hole

Vent

Power Interface

Installaon Hole

100 W

Power Supply

Baery

Circuit Board Baery Bracket

Installaon Hole

Baery (Oponal)

12V Ouptut Power Supply Cable

12V Ouptut

Power Supply Cable

Case

Installaon Hole

12V_R

GND

12V_D

Fire-

Fire+

GND

BUTTON

GND

12V_IN

GND

BAT+

BAT-

12V Output

12V

Output

Installation

Regulatory Information

This product and - if applicable - the supplied accessories too are marked

with "CE" and comply therefore with the applicable harmonized European

standards listed under the RE Direcve 2014/53/EU, the EMC Direcve

2014/30/EU, the RoHS Direcve 2011/65/EU.

2012/19/EU (WEEE direcve): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collecon points.

For more informaon see: www.recyclethis.info

2006/66/EC (baery direcve): This product contains a baery that cannot

be disposed of as unsorted municipal waste in the European Union. See the

product documentaon for speciﬁc baery informaon. The baery is

marked with this symbol, which may include leering to indicate cadmium

(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to

your supplier or to a designated collecon point. For more informaon see:

www.recyclethis.info

FCC Conditions

This device complies with part 15 of the FCC Rules. Operaon is subject to the following

two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operaon.

EU Conformity Statement

FCC Information

Please take aenon that changes or modiﬁcaon not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protecon against harmful interference in a residenal installaon.

This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instrucons, may cause harmful interference to radio

communicaons. However, there is no guarantee that interference will not occur in a

parcular installaon. If this equipment does cause harmful interference to radio or

television recepon, which can be determined by turning the equipment oﬀ and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

—Reorient or relocate the receiving antenna.

—Increase the separaon between the equipment and receiver.

—Connect the equipment into an outlet on a circuit diﬀerent from that to which the

receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance 20cm between

the radiator and your body.

Safety Instruction

These instrucons are intended to ensure that user can use the product correctly to avoid danger or property loss.

The precauon measure is divided into Warnings and Cauons:

Warnings: Neglecng any of the warnings may cause serious injury or death.

Cauons: Neglecng any of the cauons may cause injury or equipment damage.

Warnings

In the use of the product, you must be in strict compliance with the electrical safety regulaons of the naon and region.

The equipment must be connected to an earthed mains socket-outlet.

Shock hazard! Disconnect all power sources before maintenance.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Hazardous live and the external wiring connected to the terminals requires installaon by an instructed person.

Please make sure that the power has been disconnected before you wire, install or dismantle the device.

When the product is installed on wall or ceiling, the device shall be ﬁrmly ﬁxed.

Never place the equipment in an unstable locaon. The equipment may fall, causing serious personal injury or death.

If smoke, odors or noise rise from the device, turn oﬀ the power at once and unplug the power cable, and then please contact the service center.

If the product does not work properly, please contact your dealer or the nearest service center. Never aempt to disassemble the device yourself. (We

shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)

Cauons

Do not drop the device or subject it to physical shock, and do not expose it to high electromagnesm radiaon. Avoid the equipment installaon on

vibraons surface or places subject to shock (ignorance can cause equipment damage).

Do not place the device in extremely hot (refer to the speciﬁcaon of the device for the detailed operang temperature), cold, dusty or damp

locaons, and do not expose it to high electromagnec radiaon.

The device cover for indoor use shall be kept from rain and moisture.

Exposing the equipment to direct sun light, low venlaon or heat source such as heater or radiator is forbidden (ignorance can cause ﬁre danger).

Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfuncon however), and aﬀecng

the endurance of sensor at the same me.

Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the ﬁngers may

erode the surface coang of the device cover.

Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents.

Please keep all wrappers aer unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the

original wrapper. Transportaon without the original wrapper may result in damage on the device and lead to addional costs.

Install the equipment according to the instrucons in this manual.

Keep the switch downwards when moving or using the equipment.

Keep at least 10 mm distance around the equipment for suﬃcient venlaon.

The venlaon should not be impeded by covering the venlaon openings with items, such as newspapers, table-cloths, curtains, etc. The openings

shall never be blocked by placing the equipment on a bed, sofa, rug or other similar surface.

Case Door

1. Open the case door with key and disassemble the case door.

2. Disassemble the protecon cover on the power supply.

4. Assemble the protection cover back.

5. Assemble the case door back.

5. Finish installation.

3. Secure the case body on the mounng area.

1) Drill holes on the mounng area according to the mounng holes at the

boom of the case body.

2) Instert the expansion sleeves into the drilled holes.

3) Align the case body and the drilled holes. And secure the case body on

the mounng area with 3 set screws (PA4 × 35).

4) Complete the wiring inside the case.

Protecon Cover

To prevent injury, this equipment must be

securely aached to the mounng area in

accordance with the installaon instrucons.

This equipment is suitable for mounng on

concrete or other non-combusble surface

only.

Scan QR code below to get the device command and communicaon matrix.

Device Command Communication Matrix

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Adgangskontrolsystem
Model:	DS-K7M-AW100

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikvision DS-K7M-AW100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Adgangskontrolsystem Hikvision Manualer

Hikvision DS-PI-Q150 Manual

8 December 2024

Hikvision DS-PKA-WLM-433 Manual

6 Oktober 2024

Hikvision DS-PK-LRT(433MHz) Manual

18 September 2024

Hikvision DS-TMG035 Manual

2 September 2024

Hikvision DS-TMT202-D Manual

2 September 2024

Hikvision DS-TMT201-D Manual

2 September 2024

Hikvision DS-K7M-AW50 Manual

31 August 2024

Hikvision DS-K1T804BF Manual

30 August 2024

Hikvision DS-K1802M Manual

23 August 2024

Hikvision DS-K1107AEK Manual

23 August 2024

Adgangskontrolsystem Manualer

Nyeste Adgangskontrolsystem Manualer

Abus BRIDGE One Manual

5 Januar 2025

ACTi LACS3000 Manual

31 December 2025

EQ-3 HM-LC-BL1-SM Manual

29 December 2024

Abus FG500 HZ Manual

22 December 2024

Vimar 14470 Manual

15 December 2024

Vimar 14470.SL Manual

15 December 2024

Vimar ELVOX 80CN Manual

15 December 2024

Vimar ELVOX 80C3 Manual

15 December 2024

Abus CodeLoxx Manual

9 December 2024

Abus AE255F Manual

9 December 2024