a embly instruct nsss io
Family: Cambridge      Item No. 3616
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. Prepare gem strap  for mounting by threading two screws  provided into (A) (B)
back of gull wing bracket of gem strap   - see  .(A) Drawing 1
• Be sure the holes into which the screws are threaded match the spacing of holes (D)
in the ceiling pan   - see  .(1) Drawings 1 and 2
2. Mount gem strap  to junction box  , using the two 1” screws  provided.(A) (J) (C) not 
Make electrical connections from supply wire to fixture lead wires. Refer to instruction 
sheet  and follow all instructions to make all necessary wiring connections. (I.S. 18)
Then refer back to this sheet to continue installation of this fixture.
1. Hang the fixture by slipping the holes  in the ceiling pan   over the screws (D) (1) (B)
in the mounting strap   - see  .(A) Drawing 2
2. Thread on ball knobs  to secure fixture to the ceiling.(F)
1. To install glass, thread center stem  into coupler  , located in the center of (2) (G)
ceiling pan   - see  .(1) Drawing 3
2. Slip glass   onto center stem  .(3) (2)
3. While holding glass slip decorative plate (4) onto center stem (2) and hold in position.
4. Thread decorative knob (5) onto end of stem to secure glass.
*** The construction of this fixture will be accomplished by first mounting the
mounting strap to the junction box, making all necessary electrical connections, 
hanging the fixture from the ceiling, and then installing the glass.
sta  herert
3616
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) 
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING 
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED 
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Drawing 2 - Fixture Mounting
Drawing 3 - Glass Installation
B
D
F
J
C
A
1
   
Drawing 1 - Strap Detail
B
(side view)
gull wing
bracket
B
10.1.08
1
3
2
4
5
G
REVISION 1