Honeywell RPLS731B1009 Manual

Honeywell Skifte RPLS731B1009

Læs gratis den danske manual til Honeywell RPLS731B1009 (12 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 64 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 32.5 anmeldelser. Har du et spørgsmål om Honeywell RPLS731B1009, eller vil du spørge andre brugere om produktet?

Side 1/12
INSTALLATION AND USER GUIDE
69-2457EFS-05
RPLS730B / RPLS731B
Programmable Wall Switch
APPLICATIONS
The RPLS730B / RPLS731B programmable wall switch has been designed to
control lightings and motors:
INSTALLATION
NOTE: This switch cannot be used if there are not at least 2 white wires joined
by a connector inside the electrical box.
1. Cut power at the circuit breaker to avoid electric shock.
2. Remove the existing switch.
3. Install the new switch as shown in the diagram below.
4. Apply power at the circuit breaker.
Load type Maximum load Examples
Resistive load 2400 W (20 A @ 120 V) incandescent lights
halogen lights
block heater
Inductive load 2400 W (20 A @ 120 V) fluorescent lights
compact fluorescent lights (CFL)
sodium lamps
electronic ballasts
Motor 1 hp pool filter pumps
fans
M38497
120 VAC (line)
blue (load)
white (neutral)
Load
black (line)


Produkt Specifikationer

Mærke: Honeywell
Kategori: Skifte
Model: RPLS731B1009

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell RPLS731B1009 stil et spørgsmål nedenfor, og andre brugere vil svare dig