HOTO QWLSD011 Manual

HOTO Skruemaskine QWLSD011

Læs gratis den danske manual til HOTO QWLSD011 (52 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om HOTO QWLSD011, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/52

Screwdriver Bit

Bit Holder

Light

Torque Knob

Forward/Reverse rotation

button

Charging Indicator

Type-C Charging Port

02 How to Use

01 Product Overview

Read this manual carefully before use, and retain it for future

reference.

Thank you for purchasing the HOTO 3.6V Screwdriver Kit.

Turning the product on/oﬀ

Turn the torque knob to level I, II,

or III then press the forward/re-

verse rotation button to start the

screwdriver.

Release the forward/reverse rotation

button to pause the screwdriver.

Turning the light on/oﬀ

The light automatically turns on

when the screwdriver is turned on.

The light will turn oﬀ 10 seconds

after the forward/reverse rotation

button is released.

Forward/Reverse rotation button

Press the end of the rotation

button to tighten a screw.

Press the end of the rotation

button to remove a screw.

Torque knob

When the torque knob is set to level I, it is in low torque mode.

When the torque knob is set to level II, it is in medium torque mode.

When the torque knob is set to level III, it is in high torque mode.

Indicator status

If the battery level drops below 20% when the screwdriver is

in use, the indicator will blink red quickly, and it will turn oﬀ

three seconds after the button is released.

When charging, the indicator will slowly blink white.

When the battery is fully charged, the indicator will stay white.

This screwdriver is equipped with a universal Type-C

charging port.

Work Area Safety

Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

Do not operate power tools in explosive atmospheres, such

as in the presence of ﬂammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

WARNING! Read all safety warnings, instructions,

illustrations and speciﬁcations provided with this

power tool.

Failure to follow all instructions listed below

may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

03 Storage

04 General Power Tool

Safety Warnings

C6.3 × 25 mm Long screwdriver bit × 24

60 mm Extension rod × 1

Bottom case

Upper cover

C6.3 × 50 mm Long

screwdriver bit × 1

Note: The screwdriver bits are consumables.

How to open and close the

storage box

Slide the upper cover by

pushing its raised part in the

direction of the arrow.

To use HOTO electric

screwdriver kit, rotate the upper

cover in the direction of the

arrow to open the storage box.

After use, store the tool and

accessories in the bottom

case of the storage box. Align

the upper cover with the

arrow on the bottom case,

place the upper cover on the

corresponding slot on the

bottom case, and the upper

cover will be automatically

locked by magnetic

absorption.

Produkt Specifikationer

Mærke:	HOTO
Kategori:	Skruemaskine
Model:	QWLSD011

Har du brug for hjælp?

Hvis du har brug for hjælp til HOTO QWLSD011 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skruemaskine HOTO Manualer

HOTO QWLSD011 Manual

3 Juli 2025

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Einhell TP-CW 18/260 Li BL Manual

30 Juni 2025

Daewoo DALID18-1 Manual

29 Juni 2025

28 Juni 2025

25 Juni 2025

25 Juni 2025

25 Juni 2025

25 Juni 2025

Rodcraft RC4760 Manual

24 Juni 2025

Vigor V3653 Manual

24 Juni 2025

Hyundai IW20X-700 Manual

19 Juni 2025