HQ EL-PIRLA80 Manual

HQ Bevægelsesdetektor EL-PIRLA80

Læs gratis den danske manual til HQ EL-PIRLA80 (66 sider) i kategorien Bevægelsesdetektor. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om HQ EL-PIRLA80, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/66

EL-PIR80

Radar sensor light

The sensor light has an active motion detector, the integrated HF sensor emits high-

frequency electro-magnetic wave (5.8GHz) and receives their echo. The sensor

detects the change in echo from even the slightest movement in the light’s detection

zone. A microprocessor then triggers the “switch light ON” command. Detection is

possible through doors, panes of glass or thin walls.

Detection zones for ceiling mounting

1) Minimum reach 1m dia.

2) Maximum reach 8m dia.

Detection zones for wall mounting

3) Minimum reach 1m dia.

4) Maximum reach 8m dia.

Important: persons or objects moving towards the light are detected best!

Installation procedures

1. Take down the glass shade by turning it anti-clockwise (see g.1)

2. Hold base against the wall and mark drill holes, paying attention to any existing

wiring in the wall;

3. Drill the holes, insert wall plugs (6mm dia);

4. Put the power wire and load wire through the base holes;

5. Screw the base into place (see g. 2);

6. Connect the mains power supply and the load wire to the connection terminal

according to connection-wire mark.

7. Adjust knob to setting;

8. Fit glass shade and turn it clockwise (see g. 3).

Produkt Specifikationer

Mærke:	HQ
Kategori:	Bevægelsesdetektor
Model:	EL-PIRLA80
Produktfarve:	Hvid
Pakkevægt:	1580 g
Driftstemperatur (T-T):	0 - 40 °C
Dimensioner (BxDxH):	300 x 300 x 110 mm
Forbindelsesteknologi:	Trådløs
Monteringstype:	Loft
Pakkens dimensioner (BxDxH):	320 x 320 x 125 mm
Indgangsspænding:	220 - 240 V
Driftsfrekvens:	5.8 Mhz
Maks. rækkevidde:	8 m