Thank you for choosing this Icom product.
READ ALL INSTRUCTIONS carefully and completely
before using this product.
1-1-32 Kamiminami, Hirano-ku,
SAVE THESE INSTRUCTIONS— This instruction sheet
contains basic operating instructions for the transceiver.
This instruction sheet includes some functions that
are usable only when your dealer presets them. The
transceiver may have other functions and operations that
are not described in this instruction sheet. Ask your dealer
for preset function details.
Icom is not responsible for the destruction, damage to, or
performance of any Icom or non-Icom equipment, if the
malfunction is because of:
•Forcemajeure,including,butnotlimitedto,res,
earthquakes,storms,oods,lightning,othernatural
disasters, disturbances, riots, war, or radioactive
•The use of Icom transceivers with any equipment that is
not manufactured or approved by Icom.
Icom and the Icom logo are registered trademarks of
Icom Incorporated (Japan) in Japan, the United States,
the United Kingdom, Germany, France, Spain, Russia,
Australia, New Zealand, and/or other countries.
AMBE+2 is a trademark and property of Digital Voice
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Icom Inc. is under license.
All other products or brands are registered trademarks or
trademarks of their respective holders.
RDANGER HIGH RF VOLTAGE! NEVER touch an
antenna or antenna connector while transmitting. This
could cause an electrical shock or burn.
RDANGER! NEVER operate the transceiver near
unshielded electrical blasting caps or in an explosive
atmosphere. This could cause an explosion and death.
RDANGER! NEVER place the transceiver where air bag
deployment may be obstructed during mobile operations.
RWARNING! NEVER connect the transceiver to an AC
outlet.Thismayposearehazardorresultinanelectric
RWARNING! NEVER operate the transceiver during a
lightning storm. It may result in an electric shock, cause
areordamagethetransceiver.Alwaysdisconnectthe
power source and antenna before a storm.
RWARNING! NEVER let metal, wire, or other objects
contact the transceiver inside or make incorrect contact
with connectors on the rear panel. This could cause an
electric shock or damage the transceiver.
RWARNING! NEVER place the transceiver where the
vehicle’s normal operation may be hindered or where it
could cause bodily injury.
RWARNING! NEVER operate the transceiver if you
notice an abnormal odor, sound, or smoke. Immediately
turn OFF the power and remove the DC power cable.
Contact your Icom dealer or distributor for advice.
RWARNING! NEVER put the transceiver in an unstable
place where the transceiver may suddenly move or fall.
This could cause an injury or damage the transceiver.
CAUTION: DO NOT connect the transceiver to a power
source of more than 16 V DC such as a 24 V battery. This
could damage the transceiver.
Personal death, serious injury or an
Personalinjury,rehazardorelectric
CAUTION Equipment damage may occur.
If disregarded, inconvenience only. No
riskofpersonalinjury,reorelectric
CAUTION: DO NOT cut the DC power cable between
the DC plug and fuse holder. If an incorrect connection is
made after cutting, the transceiver might be damaged.
CAUTION: DO NOT expose the transceiver to rain, snow
or any liquids. They could damage the transceiver and
CAUTION: DO NOTusethenon-speciedmicrophone.
Other microphones have dierent pin assignments and
may damage the transceiver.
CAUTION: DO NOT use the transceiver in areas with
temperatures below –30°C (–22°F) or above +60°C
(+140°F), or in areas subject to direct sunlight, such as the
CAUTION: DO NOT place or leave the transceiver in
excessively dusty environments. This could damage the
CAUTION: DO NOTuseharshsolventssuchasBenzine
or alcohol when cleaning. This could damage the
equipment surfaces. If the surface becomes dusty or dirty,
wipe it clean with a soft, dry cloth.
CAUTION: DO NOT reverse the DC power cable polarity.
This could damage the transceiver.
NEVER place the transceiver in an insecure place to avoid
inadvertentusebyunauthorizedpersons.
NEVER operate the transceiver without running the
vehicle’s engine. The vehicle’s battery will quickly run out
when the transceiver transmits while the vehicle’s engine
BE CAREFUL! The transceiver may become hot after
continuously transmitting for long periods of time.
The AMBE+2™ voice coding Technology embodied in this
product is protected by intellectual property rights including
patent rights, copyrights and trade secrets of Digital Voice
Systems, Inc. This voice coding Technology is licensed
solely for use within this Communications Equipment.
The user of this Technology is explicitly prohibited from
attempting to extract, remove, decompile, reverse
engineer, or disassemble the Object Code, or in any other
way convert the Object Code into a human-readable form.
#8,359,197, #7,970,606, and #6,912,495 B2.
ABOUT GPS/GLONASS RECEIVER
DO NOT install the GPS antenna near the transceiver or
A GPS or GLONASS receiver may not work if the
transceiver transmits or receives in the frequency ranges
FortheIC-F5330D (Unit:MHz)
GPS Receiver GLONASS Receiver
142.850 ~ 142.860 145.275 ~ 145.945
157.135 ~ 157.145 159.805 ~ 160.540
146.845 ~ 147.110 149.745 ~ 150.790
FortheIC-F6330D (Unit:MHz)
GPS Receiver GLONASS Receiver
443.545 ~ 444.065 449.335 ~ 451.425
For the European versions:
CAUTION: DO NOT Hot surfaces. touch
the transceiver’s surface after continuously
transmitting for long periods of time. The
transceiver’s chassis radiates heat, and it
will become hot to protect the power
amplierunitfromoverheating.Touchingit
Hereby, Icom Inc. declares that the versions
of IC-F5330D and IC-F6330D which have
the “CE” symbol on the product, comply with
the essential requirements of the Radio
Equipment Directive, 2014/53/EU, and the
restrictionoftheuseofcertainhazardoussubstancesin
electrical and electronic equipment Directive, 2011/65/EU.
The full text of the EU declaration of conformity is available
at the following Internet address:
https://www.icomjapan.com/support/
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you
that in the European Union, all electrical and
electronic products, batteries, and
accumulators (rechargeable batteries) must
be taken to designated collection locations at
the end of their working life. Do not dispose
of these products as unsorted municipal waste. Dispose of
them according to the laws in your area.
About E-marking: Detailed installation notes for
Icommobiletransceiverstobettedintovehiclesare
available. Please contact your Icom dealer or distributor.
To ensure that your exposure to RF
electromagnetic energy is within the FCC
and IC allowable limits for occupational
use, always adhere to the following
• DO NOT operate the radio without a proper antenna
attached, as this may damage the radio and may also
cause you to exceed FCC and IC RF exposure limits.
A proper antenna is the antenna supplied with this
radiobythemanufactureroranantennaspecically
authorizedbythemanufacturerforusewiththisradio.
• transmit for more than 50% of total radio DO NOT
use time (“50% duty cycle”). Transmitting more than
50% of the time can cause FCC and IC RF exposure
compliance requirements to be exceeded. The radio is
transmitting when the status indicator lights red. You
can cause the radio to transmit by pressing the [PTT]
Electromagnetic Interference/Compatibility
During transmissions, your Icom radio generates RF
energy that can possibly cause interference with other
devices or systems. To avoid such interference, turn o
the radio in areas where signs are posted to do so. DO
NOT operate the transmitter in areas that are sensitive to
electromagnetic radiation such as hospitals, aircraft, and
SAFETY TRAINING INFORMATION
Your Icom radio generates RF
electromagnetic energy during transmit
mode. This radio is designed for and
classiedas“OccupationalUseOnly,”
meaning it must be used only during the
course of employment by individuals
awareofthehazards,andthewaysto
minimizesuchhazards.Thisradiois
NOT intended for use by the “General Population” in an
uncontrolled environment.
For compliance with FCC and IC RF Exposure
Requirements, the transmitter antenna installation shall
comply with the following three conditions:
1. The transmitter antenna gain shall not exceed 0 dBi.
The antenna is required to be located outside of a
vehicle and kept at a distance of 57 centimeters
(23 inches) or more between the transmitting antenna
of this device and any persons during operation. For
small vehicle as worst case, the antenna shall be
located on the roof top at any place on the center line
along the vehicle in order to achieve 57 centimeters
(23 inches) separation distance. In order to ensure this
distance is met, the installation of the antenna must
be mounted at least 57 centimeters (23 inches) away
from the nearest edge of the vehicle in order to protect
against exposure to bystanders.
The antenna is required to be located outside of a
vehicle and kept at a distance of 41 centimeters
(17 inches) or more between the transmitting antenna
of this device and any persons during operation. For
small vehicle as worst case, the antenna shall be
located on the roof top at any place on the center line
along the vehicle in order to achieve 41 centimeters
(17 inches) separation distance. In order to ensure this
distance is met, the installation of the antenna must
be mounted at least 41 centimeters (17 inches) away
from the nearest edge of the vehicle in order to protect
against exposure to bystanders.
Transmit only when people outside the vehicle are
at least the recommended minimum distance of
136 centimeters (54 inches) away from the properly
installed antenna. This separation distance will
ensurethatthereissufcientdistancefromaproperly
installed externally-mounted antenna to satisfy the RF
exposure requirements in the applicable RF exposure
Transmit only when people outside the vehicle are
at least the recommended minimum distance of
117 centimeters (47 inches) away from the properly
installed antenna. This separation distance will
ensurethatthereissufcientdistancefromaproperly
installed externally-mounted antenna to satisfy the RF
exposure requirements in the applicable RF exposure
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the condition that this device does
not cause harmful interference.
CAUTION:Changesormodicationstothistransceiver,
not expressly approved by Icom Inc., could void
your authority to operate this transceiver under FCC
NOTE: Some accessories are not supplied, or the shape
is dierent, depending on the transceiver version.
Fuses are installed in the supplied DC power cable. If a
fuse blows, track down the source of the problem, repair it,
and replace the damaged fuse with a new rated one.
The shape of fuses and its cases are dierent,
depending on the supplied DC power cable.
Fuse rating: 32 V, 20 A for the OPC-2478
250 V, 10 A for the OPC-2479
NOTE:Useonlyspeciedfuses(10Aor20A).
25 W transceiver: 10 A, 45 W or 50 W transceivers: 20 A
• EXTERNAL SPEAKERSSP-30/SP-35/SP-35L
SP-35/SP-35L: Rated input 5 W, Maximum input 7 W
SP-30: Rated input 20 W, Maximum input 30 W
•OPC-1939/OPC-2078 ACC CABLES
Used to connect an external device.
OPC-1939: D-sub 15-pin, an external level converter
(user supplied) is required.
OPC-2078: D-sub 25-pin, built-in level converter
• DC POWER CABLESOPC-2478/OPC-2479
(For only the transceiver with the Bluetooth function)
The Bluetooth headset with a [PTT] switch.
•About the third party Bluetooth
(For only the transceiver with the Bluetooth function)
Icom has checked the PTT operation with some 3M
Peltor headsets such as the WS Headset XP, WS ProTac
XP and WS Alert XP. (Compatibility not guaranteed.)
A key element in the performance of any communication
system is the antenna. Contact your dealer for information
regarding antennas and how to install them.
Internal Bluetooth unit information:
( For only the transceiver with the Bluetooth function)
