i
IMPORTANT
READ THIS INSTRUCTION MANUAL
CAREFULLY before attempting to operate the re-
peater.
SAVE THIS INSTRUCTION MANUAL– This
manual contains important safety and operating in-
structions for the IC-FR5100 and IC-FR5100H vhf
dpmr repeaters, and the IC-FR6100 and IC-FR6100H
uhf dpmr repeaters.
FORWARD
Thank you for purchasing this Icom repeater. The IC-
FR5100/H and the IC-FR6100/H are designed and
built with Icom’s state of the art technology and crafts-
manship. With proper care, this product should provide
you with years of trouble-free operation.
We appreciate you making the IC-FR5100/H and
IC-FR6100/H your repeater of choice, and hope you
agree with Icom’s philosophy of “technology first.”
Many hours of research and development went into
the design of your IC-FR5100/H and IC-FR6100/H.
D FEATURES
m Up to 2 channel operation
(IC-FR5100/IC-FR6100 only)
You can install an optional UR-FR5100/UR-FR6100
channel extension module into a repeater. 2 chan-
nels can be utilized when a channel extension
module is installed.
m Built-in 5-Tone, DTMF encoder & decoder
Multiple signaling systems are included as stan-
dard. These systems are fully compatible with Icom
F-series radios.
m DTMF remote control capability
You can control the repeater from a remote location
over the air, or over a phone line with DTMF.
m D-Sub 25 pin ACC port equipped
You can use optional equipment connected to
the D-sub 25 pin ACC port on the repeater’s rear
panel.
m Other features
- Wide 136 to 174 MHz, 400 to 470 MHz frequency
coverage
- PC programmable
- 19 inch rack mountable
- Optional UT-109R/UT-110R Voice Scrambler Unit
for base operation
EXPLICIT DEFINITIONS
WORD DEFINITION
RWARNING!
Personal injury, fire hazard or electric
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No
risk of personal injury, fire or electric
shock.
SUPPLIED ACCESSORIES
The following accessories are supplied.
Handles
For handle attachment
Spacers Screws
Coaxial cable
(OPC-2243)*
1
DC power cable*
2
Function name stickers*
3
KEY SEAL
*
1
This item is supplied only with the
high power versions.
*
2
Two DC power cables are supplied
with the high power versions.
*
3
Used for labelling the programmable
function keys according to their
assinged functions.
