Ikan SLD-47-PRO Manual

Ikan Ikke kategoriseret SLD-47-PRO

Læs gratis den danske manual til Ikan SLD-47-PRO (11 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 63 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 32 anmeldelser. Har du et spørgsmål om Ikan SLD-47-PRO, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/11
What’s Included
QUICKSTART GUIDE
1 x Carbon Fiber Slider
1 x Padded Carry Bag
4 x Adjustable Rubber Feet
1 x Allen Wrench
SLD-47-PRO
Heavy Duty Carbon Fiber Slider - 47 Inch
support@ikancorp.com © 2015 ikan Corporation. All rights Reserved
www.ikancorp.com 713.272.8822
CHECKED BY
Getting Started
Slider Start-Up:
You can utilize the built-in adjustable legs or mount it to one tripod (using the slider’s lower mounting plate). Also, you
may utilize two tripods or heavy duty stands on both end plates using the 1/4"-20 or 3/8"-16 mounting points.
Slider Center Mount
A 3/8"-16 thread in the center of the camera platform is provided to mount ball-level heads, fluid heads, and quick
release plates, making camera mounting and removal easy. Any flat mount 3/8"-16 threaded fluid head will mount to
the slider without tools. Mount your camera to the provided plate with these products.
Level & Shoot:
When shooting, find a stable platform or use tripods and stands to level your slider. Use the slider carriage brake to
lock the movement while leveling the slider. The legs have rosettes to adjust to angles. Use the provided bubble level
to see when the slider is level. Note: Always lock your slider when not operating or near the camera to ensure safe
movement on the slider.
You may operate the slider from the base (preferred) or by pushing the camera or head down the tracks. Using just
fingertips to gently push the slider will help feather the movement from start to stop. The finesse you put into the
slider movement will show in your shots.
Caring for your Slider:
The sealed bearings in the slider are maintenance-free, however, if you get dirt or sand in moving components you
may clean with a moist cloth, blow out with air and lightly oil only the bearing races with graphite or multi-purpose oil.
And never feed after midnight!
Baseplate
1/4 -20 Thread and"
3/8 -16 Thread Adapter"
3/8 -16 "
Mounting Points
Integrated
Bubble Level
Friction
Lock Knob
Adjustable
Rubber Feet
Adjustable
Leg Angles

Produkt Specifikationer

Mærke: Ikan
Kategori: Ikke kategoriseret
Model: SLD-47-PRO

Har du brug for hjælp?

Hvis du har brug for hjælp til Ikan SLD-47-PRO stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Ikan Manualer

Ikan

Ikan PT3500-HB-TK Manual

9 Juni 2025
Ikan

Ikan PT-Elite-Pro2 Manual

8 Juni 2025
Ikan

Ikan PT3700 Manual

6 Juni 2025
Ikan

Ikan PrompterPro 4 Manual

4 Juni 2025
Ikan

Ikan PT-Elite-UL-RC Manual

4 Juni 2025
Ikan

Ikan PT4200-CVK Manual

4 Juni 2025
Ikan

Ikan PT4700S-V2 Manual

4 Juni 2025
Ikan

Ikan PT3500-TK Manual

4 Juni 2025
Ikan

Ikan PSB10 Manual

4 Juni 2025
Ikan

Ikan PT3700-TK Manual

4 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Crestron

Crestron FT2A-PWR-SW-2 Manual

18 Juni 2025
Royal Catering

Royal Catering RC-TFWH120X30 Manual

18 Juni 2025
Martin

Martin VC-Strip 15 Manual

18 Juni 2025
Ikea

Ikea FJÄLLARNIKA 705.922.11 Manual

18 Juni 2025
Chapin

Chapin 78005 Manual

18 Juni 2025
Chapin

Chapin 22180XP Manual

18 Juni 2025
Audio-Technica

Audio-Technica AT-VM750xSH Manual

18 Juni 2025
D-Link

D-Link DXS-3600-EM-8XS Manual

18 Juni 2025
Chapin

Chapin 8001A Manual

18 Juni 2025
ORNO

ORNO OR-DB-KA-170PD Manual

18 Juni 2025